Re: Vintage Orvis CFO?
I might add, not only is that a BFR, but the last of the Spring / Pawl. Love that sound.
CFOs were offered in sizes II, III, IV, and V. Size II and III came standard without the nickel silver line guard, but the III was also offered with the guard for an additional charge. All other reels came standard with the line guard. All of the reels with the exception of the II had adjustable spring and pawl drags. The CFO multiplier was introduced in sizes III, IV, and V. The multipliers have a retrieve rate of 1 2/3 to 1. At this time, all CFOs are cast and then machined. On all these models, the spring and pawl mechanisms are held in place by rivets, which show on the back of the reels.
NO RIVETS ON THIS REEL
Machined reels are introduced this year, and were available in sizes II, 123, III, and IV. These reels feature a “no rivet” design. The rivets that were used to hold the drag pawls in place are removed; the pawls are now internally affixed to a reinforced internal plate. The old cast reels are still offered this year in sizes 123, III, and IV. These still had rivets through the back. The new reels were manufactured in such a way as to allow interchangeability of spools between machined and cast CFOs. However, some experimentation may be necessary before a proper fit can be attained. An “Introductory Edition CFO III” was also offered this year. The reel was identitcal to the new, machined reel except for the finish. The Introductory CFO had an olive finish (slightly different from later disc-drag models) and featured gold anodized aluminum hardware. The line guard on this model was made from nickel silver.
Guessing that is this reel, so basically 1992 to 2003. Just my guess