View Single Post
  #520 (permalink)  
Old 03-27-2012, 03:27 PM
silver creek silver creek is online now
Senior Member
 
Join Date: Feb 2011
Location: Wisconsin
Posts: 2,130
silver creek has a reputation beyond reputesilver creek has a reputation beyond reputesilver creek has a reputation beyond reputesilver creek has a reputation beyond reputesilver creek has a reputation beyond reputesilver creek has a reputation beyond reputesilver creek has a reputation beyond reputesilver creek has a reputation beyond reputesilver creek has a reputation beyond reputesilver creek has a reputation beyond reputesilver creek has a reputation beyond repute
Default Re: What have you been tying today?

The pattern is in the Autumn 2010 Fly Tyer magazine. However, unless you know how to weave, I suggest you first learn to weave simpler flies like a caddis larva in the two rows right side of the box below.

Click the image to open in full size.

Take a look at this video and practice using embroidery floss. It is cheap and comes in all the colors you would ever want.


Charlie's FlyBox - Colorado's Best FlyShop and online Fly Tying Tutorials

Weaving Flies - August 2009 TPO Tip of the Month - YouTube

Then try the patterns below.

The TPO "Dronestone"


Drone Stone - NGTO Message Board

Black Drone Stone - NGTO Message Board



Tying instructions as modified a bit by me from Aaron Jasper's original Drone Stone:

1. Put bead on hook and clamp hook in vise.

2. Move bead to back of hook. Lay a thread base using Uni Stretch Thread (this is a stretchable tying thread needed to cover the lead wire) and move thread to the front and tie rubber antennae on behind the eye. Whip finish tread or tie two half hitches and cut off thread. Slide bead over the antennae butts.

3. Remount thread and tie in rear rubber tails. Then tie copper ribbing wire to the far side of the rubber tails. Keep thread to the rear.

4. Crimp lead wire to flatten and thin it and begin winding lead wire from rear to the front. Crimped lead forms a rear taper to the lead underbody. Depending on diameter of lead wire and hook size, a second row of lead may be needed to build up body. Make sure the lead under body maintains the tapered shape. Cover lead wire with Uni Stretch to form a smooth underbody. You may choose to do this step with dental floss or other floss if you don't have Uni Stretch tying thread.

5. Tie in the two colors of embroidery floss, on on each side of the body. Form a smooth underbody of Uni Stretch, tie off and cut off the thread. Weave the body 2/3 of the way to the hook eye, remount tying thread, wrap the ends of the embroidery floss, and cut off the floss.

6. Wind copper wire around the woven body, cut off and wrap end with tying thread.

7. Woven abdomen will be about 1/2 of the body. Tie in the wing pad material facing the rear of the fly (I used brown Swiss straw) and tie it down up to the 1/2 point.

8. Tie in the rear rubber legs on each side and tie them down rear to front along the sides up to the back of the bead.

9. Return thread to the back of the thorax and dub and wind forward about half of the thorax. Fold swiss straw forward over the dubbed section and tie down and go forward another few wraps. Fold swiss backwards over itself and tie down. Swiss Straw is now towards the rear of the hook again.

10. Dub and wind over the tied down section of swiss straw, and then dub forward to the back of the bead. Fold swiss straw forward to form the forward wing case. Tie down swiss straw with 2 thread wraps, cut off swiss straw and finish the tie off with a 5 turn whip finish.

Instead of swiss straw, other wing case material such as turkey tail, or cut thin skin can be used. For me the swiss straw is faster. If you use other materials to form individual wing pads, the tying instructions change to accommodate the different construction method of tying down the pads over the dubbed thorax instead of folding the material to form pads with swiss straw.
__________________
Regards,

Silver



"Discovery consists of seeing what everybody has seen and thinking what nobody has thought"..........Szent-Gyorgy

Last edited by silver creek; 03-27-2012 at 06:52 PM.
Reply With Quote