The North American Fly Fishing Forum


Go Back   The North American Fly Fishing Forum > Blogs > Hardyreels

Rate this Entry

Still Working on The Cabin;

Posted 06-05-2014 at 11:55 PM by Hardyreels

I've been at the lake most of the past 2 weeks and although I took some time to go up to the Talachulitna to fish for trout and did some exploring on the Yentna River.......... I finally finished the second floor ceiling and sheeted the gable walls in the cabin.
Click the image to open in full size.

On the front end of the building I had built a bridge to extend the loft to reach the large gable windows. This had been only a dream until this winter when I finished the floor and just last week erected rails for safety.
Click the image to open in full size.

The front porch has only had 1 set of stairs to enter & exit with since the logs were stacked 16 years ago. I built a new stair on the other end of the porch just 10 days ago also.
Click the image to open in full size.

The porch is 24 feet wide and until now you had to use the old steps and walk all the way around the cabin to reach this building
Click the image to open in full size.

When its raining hard the lessened distance will be greatly appreciated.

The next couple pictures show the look up from first floor to the loft now with its rails and finished ceilings and walls.
Click the image to open in full size.

Click the image to open in full size.

Click the image to open in full size.

These are the steps on the south end of the porch that I rebuilt 2 summers ago. I was lucky this past week to be able to get 2 coats of finish on both set of steps and the outhouse without rain happening.
Click the image to open in full size.

AN entry to this blog would not be right without mention of my friend Boss who is along helping on every trip. Here's a shot of him coming down the ladder from the loft.
Click the image to open in full size.

It took him a while to get good at that because the steps / ladder are very steep but he goes up and down all by himself. I stay close and spot him just in case he were to come down head first way too fast

I'm looking very much forward to hanging the sheeting on the first floor ceilings and being able to burn electric lights this winter. I currently use just one lamp powered by a deep cycle battery inverter system which I charge with the generator whenever I use it to run power tools. When the wiring is done there will be 5 ceiling lights and a ceiling fan above the bridge in the very peak of the building to circulate heat in winter.

I'll be away fishing most of the next 3 months but will get the electric wires in the first floor ceiling and then get the panels up on the rafters and the place will begin to look cozy. All of this is taking place 76 miles off the road system and I am doing it alone so it takes time.

I'll be posting some fishing pictures in the next few days because I'm going for some King Salmon tomorrow and actually for the next 25 days.

Ard
Posted in Uncategorized
Views 120 Comments 2 Email Blog Entry
« Prev     Main     Next »
Total Comments 2

Comments

  1. Old Comment
    milt spawn's Avatar
    That looks great Ard, alot safer now. Too bad Boss can't bring stuff up the ladder!
    permalink
    Posted 06-06-2014 at 01:51 AM by milt spawn milt spawn is online now
  2. Old Comment
    jaybo41's Avatar
    Ard,

    Your cabin is really coming along well! From the looks of things, it's no wonder we haven't seen you much on the forum over the past few weeks. You Boss and the Misses have been BUSY! Your hard work looks great, looks to be very cozy there. The picture of Boss making his way down the steps is priceless.

    Thanks for taking the time to post another entry and best of luck to you this salmon season!
    permalink
    Posted 06-07-2014 at 08:04 PM by jaybo41 jaybo41 is offline
 












All times are GMT -5. The time now is 10:26 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0
2005-2014 The North American Fly Fishing Forum. All rights reserved.