The North American Fly Fishing Forum

The North American Fly Fishing Forum (http://www.theflyfishingforum.com/forums/)
-   Fly Reels (http://www.theflyfishingforum.com/forums/fly-reels/)
-   -   Hardy LRH spare parts (http://www.theflyfishingforum.com/forums/fly-reels/318190-hardy-lrh-spare-parts.html)

mspesci 05-01-2013 08:37 PM

Hardy LRH spare parts
 
Anybody know where to get spare parts for an early Hardy LRH? I have a two screw lineguard model, but dropped and lost one of the screws.

Thanks,
Matt

Hardyreels 05-01-2013 08:47 PM

Re: Hardy LRH spare parts
 
Either this link to Hardy USA and then use the 'Contact Hardy' tab; Hardy North America

Or this guy will have a screw to fit; Archuleta’s Reel Works | Fly Fishing Reel Repair

Ard

jaybo41 05-01-2013 09:03 PM

Re: Hardy LRH spare parts
 
Ard has it covered...once again. Ken Hodgen from Hardy USA took great care of me when I needed an A Pack (springs & pawls).

Hardy Fly Fishing - Customer Service Home

You could try him, but if Hardy can't take care of you Archuletta sure will.

Hardyreels 05-02-2013 01:22 AM

Re: Hardy LRH spare parts
 
Thinking..............

If you're gonna keep the reel for the long haul (I've had my Featherweight since 1978) you should get at least a set of screws for the line guard, a set for the latch cover (sooner or later you'll snoop under there) and an 'A' kit for the reel. Then you'll never worry about having it down during a season.

Plan 'B' would involve; Always dissemble a reel with a sheet of printer paper (or similar) on a flat surface and remember where the parts came from and their orientation when you reassemble. And.......be sure to use the correct size screw driver so you don't hack up the screw heads or slip and mar the reel ;)

jaybo41 05-02-2013 06:52 PM

Re: Hardy LRH spare parts
 
Ard, you now have me thinking about adding a couple of A Packs and some screws for my LRH's. You never know when you might need the parts.

rockthief 05-02-2013 07:47 PM

Re: Hardy LRH spare parts
 
Hardy has "A" packs again? THat would be just right.

mspesci 05-27-2013 07:54 PM

Re: Hardy LRH spare parts
 
Thank you all for the information. Ken Hodgen from Hardy USA hooked me up with some spare screws. Also appreciate the link to the Fly Fishing Reel repair gentleman, that may come in handy one day.

jaybo41 05-28-2013 06:48 PM

Re: Hardy LRH spare parts
 
Thanks for the follow up post on this. It's great to know that Hardy still has stock available on the screws for the line guard. I figured they should but you never know.

jaybo41 06-20-2013 01:26 PM

Re: Hardy LRH spare parts
 
I inquired about 2 screw line guard availability with Hardy and they do not have them. Bill Archuleta can make or re-condition a worn one. Just thought I'd pass the info along.


All times are GMT -5. The time now is 08:29 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0
2005-2014 The North American Fly Fishing Forum. All rights reserved.