The North American Fly Fishing Forum

The North American Fly Fishing Forum (http://www.theflyfishingforum.com/forums/)
-   General Discussion (http://www.theflyfishingforum.com/forums/general-discussion/)
-   -   How much $ to replace a Cork handle? (http://www.theflyfishingforum.com/forums/general-discussion/104578-how-much-replace-cork-handle.html)

ausablebrown 02-15-2011 02:30 PM

How much $ to replace a Cork handle?
 
Just a quick question; how much (generally speaking) would my local rod builder charge to replace the cork handle on my rod? He's closed from Mon-Wed so I can't call him up, thought I might get an idea from you guys to know if he is reasonably priced or not. It is coming unglued and I am assuming that the solution would be to take it off and put a new cork handle on. Anyone got a rough estimate, or anyone rod/builders/repairers want to make me an offer?
-Jason

fredaevans 02-15-2011 03:05 PM

Re: How much $ to replace a Cork handle?
 
Replacing the handle is not that big a job for someone who has the 'equipment' (lathe etc). What really costs is the quality of the cork you want to replace same with.

Cork ring is what, a half inch or less wide? But you can easily pay $2.00 per ring for AAAA quality.:icon_eek:

fae

ausablebrown 02-15-2011 03:10 PM

Re: How much $ to replace a Cork handle?
 
Quote:

Originally Posted by fredaevans (Post 210002)
Replacing the handle is not that big a job for someone who has the 'equipment' (lathe etc). What really costs is the quality of the cork you want to replace same with.

Cork ring is what, a half inch or less wide? But you can easily pay $2.00 per ring for AAAA quality.:icon_eek:

fae

So, you'd say there could be $20-30 in materials? Any idea how extensive the job is and what a reasonable price would be?

raindogt 02-15-2011 03:20 PM

Re: How much $ to replace a Cork handle?
 
I may be wrong, But it is my understanding that the rod has to be stripped down (at least the butt section)-- and cork put on from the tip end. So, any guides will need to come off and re-wrapped after the cork replacement, the hook keeper, likewise, etc....

Could be costly.

fredaevans 02-15-2011 03:30 PM

Re: How much $ to replace a Cork handle?
 
Quote:

Originally Posted by ausablebrown (Post 210004)
So, you'd say there could be $20-30 in materials? Any idea how extensive the job is and what a reasonable price would be?

Jason, a few "x-factors" here.

The ".... $20-30 in materials?" suggests this is a small handle so taking off the old, and cleaning up the butt of the blank would only take a few minutes. Not that big of a job (again, if you have the proper equipment, which I'll assume he does). The other 'x-factor' is if he's got to pull off/re-wrap/coat the rod guides above so he can feed the corks down to re-build the handle. And I think I'm safe to say .. he will.

All that aside, one to two hours work on his part, start to finish. So his 'bid' will be 'time, materials, and profit.' Guys got to eat and pay his rent.;)

Fred

ausablebrown 02-15-2011 03:35 PM

Re: How much $ to replace a Cork handle?
 
There are no guides on the butt section, but there is a hook keeper, and a nickel/silver ring that sits between the last section of cork and the rod.

fredaevans 02-15-2011 03:48 PM

Re: How much $ to replace a Cork handle?
 
Quote:

Originally Posted by ausablebrown (Post 210021)
There are no guides on the butt section, but there is a hook keeper, and a nickel/silver ring that sits between the last section of cork and the rod.

No guides? That's a bit odd, but what the heck. 'Usual' guide placement will have a 'gathering guide' about 24" up from the reel seat. But the ring your talking about cost 10-15 cents .. if you even want one.

That aside, save for a multi-multi-section 'travel rod,' I can't picture a rod with out at least one guide in the 'butt section.' What kind of rod do you have?

fae

ausablebrown 02-15-2011 03:54 PM

Re: How much $ to replace a Cork handle?
 
Quote:

Originally Posted by fredaevans (Post 210025)
No guides? That's a bit odd, but what the heck. 'Usual' guide placement will have a 'gathering guide' about 24" up from the reel seat. But the ring your talking about cost 10-15 cents .. if you even want one.

That aside, save for a multi-multi-section 'travel rod,' I can't picture a rod with out at least one guide in the 'butt section.' What kind of rod do you have?

fae

BIIX 9' 4pc; you made me double check though, and there is no guide on the first section of rod.

fredaevans 02-15-2011 04:08 PM

Re: How much $ to replace a Cork handle?
 
Googled the rod, and so it would appear, very unusual .. but what do I know.

Is this the same one you put up for sale?: http://www.theflyfishingforum.com/fo...-wt-375-a.html

ausablebrown 02-15-2011 04:18 PM

Re: How much $ to replace a Cork handle?
 
Quote:

Originally Posted by fredaevans (Post 210032)
Googled the rod, and so it would appear, very unusual .. but what do I know.

Is this the same one you put up for sale?: http://www.theflyfishingforum.com/fo...-wt-375-a.html

No, but oddly enough, I now may have two of them by a very strange turn of events. The new one; which I will again offer for sale if I can get this used one and be sure its not going to cost a fortune to fix the cork. I might just let it ride and fish with the cork how it is until something has to be done. It would probably fish a few years, just getting a little unglued around the top couple rings. I never thought I'd have one BIIX, let alone two...but the prices were too good to pass up


All times are GMT -5. The time now is 04:43 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0
2005-2014 The North American Fly Fishing Forum. All rights reserved.