The North American Fly Fishing Forum

The North American Fly Fishing Forum (http://www.theflyfishingforum.com/forums/)
-   General Discussion (http://www.theflyfishingforum.com/forums/general-discussion/)
-   -   New line doesn't fit reel... how would you proceed? (http://www.theflyfishingforum.com/forums/general-discussion/342563-new-line-doesnt-fit-reel-how-would-you-proceed.html)

caberguy 01-15-2014 06:07 PM

New line doesn't fit reel... how would you proceed?
 
I bought a DT2F Prestige line from Cabelas on sale to go with my Redington CT 2wt. I had also bought one of those cheap reels from China off of Amazon figuring that I'd probably never need to use the drag on my 2wt set up.

Anyway, the line doesn't quite fit on the reel, even just using a couple of feet of backing so I've got something to tie it to.

I figure I've got a few options:

1) I could cut off about 10 ft from the tail end of the line, effectively ruining the rear taper, but leaving me with a functional 70' line. This line was pretty cheap, so I wouldn't feel too bad about it (might even order a backup).

2) I could cut the line in half, leaving me with two 40-41' lines, figuring that with a 2wt I'll probably never have 40' of line in the air anyway... though it might be cutting it a little close.

3) Just buy another inexpensive reel, maybe an Okuma SLV or whatever I can find used.

4) Switch my 4wt line from my Orvis BBS II to my Teton Tioga, which I'm not currently using. I'd then use the BBS on the 2wt since it's much lighter than the Teton. The problem with this is that my 4wts are the rods I use most, and I really prefer the feel, sound and balance of the BBS with my 4wts (which was why I switched from the Teton in the first place).

mcnerney 01-15-2014 06:38 PM

Re: New line doesn't fit reel... how would you proceed?
 
Double taper fly lines are identical on both ends so if you choose option one your not really ruining anything (other than the capability of turning the whole rig around when the front end wears out) so you could go that way, especially since you are talking about a 2 wt line. What is the likelihood of ever having the whole line out while fighting a fish. Option 2 would also work, but you would probably want some more backing on the reel.

Larry

ia_trouter 01-15-2014 06:39 PM

Re: New line doesn't fit reel... how would you proceed?
 
One option is a Cabelas Wind River size 1 for 20 bucks. They hold a lot of backing. More than advertised in my estimation though I can't say I measured. Drag isn't half bad either.

akruss 01-15-2014 06:56 PM

Re: New line doesn't fit reel... how would you proceed?
 
I use to fish small streams and creeks with a 6 1/2' Orvis Superfine bamboo rod with a Hardy Flyweight reel. I always cut the double taper line in half and saved one side so when the half I was using wore out I could switch to the new line. It worked just fine and I even put on a little backing just to fill the reel. I don't ever recall casting all the line out or having a trout take me to the backing but then, as I said, I was fishing small water. It certainly wasn't a tarpon rig, LOL, but lots of fun.

A few other thoughts; a weight forward takes up a lot less space than a double taper. Because lines are so much better these days, I'd probably get a light reel that would fit the entire line. Lastly, cutting off a portion of the line so it fit the reel would be okay and not require any further purchases.

itchmesir 01-15-2014 07:05 PM

Re: New line doesn't fit reel... how would you proceed?
 
I'd cut the line in half... Seeing as you'll probably never cast over 40'

moucheur2003 01-15-2014 08:25 PM

Re: New line doesn't fit reel... how would you proceed?
 
I'd cut off the last 10 or 15 feet. That will still leave you with a comfortable length of line. The versatility to turn the line around and use the other end was a lot more meaningful when lines were expensive and made of silk than it is if your line is a sale-priced house brand from Cabela's. I've got a whole DT4 on a Hardy Featherweight, which fits only because I don't have much backing on it, but the rear taper is so tightly coiled from being stored on a small arbor that it will never be usable as a front taper anyway.

luked 01-15-2014 08:26 PM

Re: New line doesn't fit reel... how would you proceed?
 
cut it in half then you will have like for that reel for years
that's what I'm planning on doing with the 3wt I'm going to be buying here soon just fill it with half of the line and the rest use backing

williamhj 01-15-2014 08:35 PM

Re: New line doesn't fit reel... how would you proceed?
 
+1 for cutting it in half. As Akruss said, if you wear out the line on the reel the half you cut off will be an identical replacement. If you only cut 10 or 15' off the line you won't be able to do that.

Hardyreels 01-15-2014 10:07 PM

Re: New line doesn't fit reel... how would you proceed?
 
I don't want to be a party pooper but I'd buy a larger reel. Honestly, if a 2 wt. won't fit it isn't much of a reel. I used to have a hardy flyweight and it held a DT 3 with a little bit of 12# backing. The reel must be tiny,

Ard

Liphookedau 01-16-2014 02:06 AM

Re: New line doesn't fit reel... how would you proceed?
 
The way I'd go would be As Ard said,I'd buy another Reel because what's the use of Chopping The End off a DT Line or Cutting a Good line in Half if it was A Weight forward there wouldn't be a problem.
Brian.


All times are GMT -5. The time now is 09:06 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0
2005-2014 The North American Fly Fishing Forum. All rights reserved.