The North American Fly Fishing Forum

The North American Fly Fishing Forum (http://www.theflyfishingforum.com/forums/)
-   General Fly Tying Discussions (http://www.theflyfishingforum.com/forums/general-fly-tying-discussions/)
-   -   Renzetti Traveller (http://www.theflyfishingforum.com/forums/general-fly-tying-discussions/309400-renzetti-traveller.html)

williamhj 01-29-2013 08:31 PM

Renzetti Traveller
 
I finally upgraded my vise last year and got a Renzetti Traveller with a pedestal base. I find it holds a good range of hooks very firmly and enjoy tying on it. There is one issue I am running into and wonder if anyone has run into it and found a solution. The screw that secures the vise to the pedestal loosens rather easily allowing the vise to spin a bit when I tie. I've considered a drop of superglue since I plan to keep it on the pedestal base but figure there has to be a better way to secure the screw.

thanks!

kayo 01-29-2013 08:47 PM

Re: Renzetti Traveller
 
try some Loctite blue on the threads.

drc 01-29-2013 09:14 PM

Re: Renzetti Traveller
 
I have the C-clamp version of the traveler. If your tying station permits it, you could always get the C-clamp (about $45 I think) if you didn't want to glue it to the pedestal. But I would try to fix it first.

jaybo41 01-29-2013 09:27 PM

Re: Renzetti Traveller
 
I don't own that vise but I'd be leary of using Super Glue to secure it. You might consider getting in touch with Renzetti and explain your problem. Perhaps they've run into this before and can offer you a solution. Kayo's suggestion is solid, loctite is what I'd try before I used Super Glue.

woodrivertroutbum 01-29-2013 09:28 PM

Re: Renzetti Traveller
 
I agree, blue loctite.

williamhj 01-29-2013 09:30 PM

Re: Renzetti Traveller
 
Loctite sounds like a good plan. Might email Renzetti as well. It's not so bad that it's a problem just more of an annoyance. Thanks!

lthrnk03 01-29-2013 10:29 PM

Re: Renzetti Traveller
 
I have both the C-Clamp and the pedestal base. I've never had a problem with the screw loosening. My first thought before adding any Loctite to the screw would be to contact Renzetti. My understanding is that they have a pretty good customer service dept. I know from following them on Facebook, they are a small "mom and pop" company. Its always been my experience that mom and pop shops offer great customer service. Give em a call.

wt bash 01-29-2013 11:08 PM

Re: Renzetti Traveller
 
A small drop of hot glue.

flytire 01-30-2013 06:37 AM

Re: Renzetti Traveller
 
contents deleted

Jackster 01-30-2013 08:40 AM

Re: Renzetti Traveller
 
I had problems with the screw backing out on a pair of tying scissors. A guy whose in the scissor business gave me a solution that is quite good as it isn't permanent and uses simple household materials to resolve the problem. It might be worth a try on your vise. In any case it can't hurt.
Here's the thread:
http://www.theflyfishingforum.com/fo...cissors-3.html


All times are GMT -5. The time now is 02:48 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0
2005-2014 The North American Fly Fishing Forum. All rights reserved.