The North American Fly Fishing Forum

The North American Fly Fishing Forum (
-   Other Gear (
-   -   Pimped my ride (

Joni 06-14-2012 06:43 PM

Pimped my ride
Not sure where to put this, is there a pontoon/float tube section?

This is my 2013 Assault.

The FRAMELESS pontoons do pose a problem on where to mount things due to the oars.
I added Scotty glue ons which allow me to use Scotty fly rod holders, Scotty Anchor, or the Scotty Camera mount.

I got the NFO Apron and added a little more velcro so it wraps around the toons

I used Dog clips on the motor mount for quick connections

I used a 3" Nylon strap with quick clip for the Transducer

Use a Wing Nut so easy to raise and lower then tighten

I mounted a Ram ball mount to a piece of plywood which is the length of my side bag plus velcro on the bottom to hold it in place

Then I use a 4" Ram Mount to the ball mount on the Sonar screen.

I topped it all off with the Ultra Light Oars:

And the Omega Flip Fins

jaybo41 06-14-2012 06:52 PM

Re: Pimped my ride
Holy smokes! :wow::surprise::shocking: Is there anything that 'toon doesn't have?

Very cool Joni:thumbsupu

Hardyreels 06-14-2012 07:10 PM

Re: Pimped my ride
Nice ride Joni!

We don't have a raft / boat forum but you could join 'The Forum Yacht Club' I'm serious, check the Social groups or better yet take this;

mbphotos54 06-14-2012 08:53 PM

Re: Pimped my ride
now thats what you call 'ready'

webrx 06-15-2012 05:31 AM

Re: Pimped my ride
you need a hibachi so you can take fish straight from the water to the grill ;)

Very nice ride!


Liphookedau 06-15-2012 07:09 AM

Re: Pimped my ride
[QUOTE=jaybo41;463532]Holy smokes! :wow::surprise::shocking: Is there anything that 'toon doesn't have?
Joni,I can't see a Jug for making a Cuppa.Beaut Set Up you have.

Just that we were down at one of our Snowy Mountain Lakes & I noticed which I've never seen before a Guy had a Billy on board so he could stop,boil it & have a Cuppa with Lunch.

riverbilly 06-15-2012 10:56 AM

Re: Pimped my ride
Now that's a fishing machine right there. Well thought out and about all you need. Do you use a full sized 12v battery?

jpbfly 06-15-2012 11:21 AM

Re: Pimped my ride
:eek:impressive Joni:eek:looks like Baxter is wondering where his seat is... :rolleyes::D

mcnerney 06-15-2012 11:22 AM

Re: Pimped my ride
Joni: Very well thought out, I love the way you used the dog clamps for quick setup on the motor mount and the ingenius 3" nylon strap with the quick clips for the transducer............looks like I need to make a trip down to the hardware store! :D

Joni 06-15-2012 01:40 PM

Re: Pimped my ride
I do use the break your back full size #27 battery. It is in a fancy box with clips for the motor and the sonar. The Assault is smaller than the Renegade so less room behind me.
However, I do have 36" inseam so I have the seat back a ways. There is room for my PFD then the battery. I kind of lean against the pfd which is really comfortable.

Thing is, all I have added is two glue ons front and rear for rod/anchor/camera mounts and the sonar. The motor and mount is the same on all outlaws. But I had all this empty space in front of me, so I thought an apron or shelve. Cool thing will be to lay the fish on the ruler and snap a picture with little handling, and the apron is rubber coated. Not all fish, just the questionable ones...LOL

All times are GMT -5. The time now is 10:39 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2016, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0
2005-2015 The North American Fly Fishing Forum. All rights reserved.