The North American Fly Fishing Forum


Go Back   The North American Fly Fishing Forum > Fly Tyer's Round Table > Share Patterns

Share Patterns List your favorite and selfmade fly patterns. Share with other tyers. Learn how to tie various flies...

Reply
 
LinkBack Thread Tools Display Modes
  #1 (permalink)  
Old 09-06-2009, 03:32 PM
Frank Whiton's Avatar
Administrator
 
Join Date: Jan 2007
Location: Central Florida
Posts: 5,301
Frank Whiton has a reputation beyond reputeFrank Whiton has a reputation beyond reputeFrank Whiton has a reputation beyond reputeFrank Whiton has a reputation beyond reputeFrank Whiton has a reputation beyond reputeFrank Whiton has a reputation beyond reputeFrank Whiton has a reputation beyond reputeFrank Whiton has a reputation beyond reputeFrank Whiton has a reputation beyond reputeFrank Whiton has a reputation beyond reputeFrank Whiton has a reputation beyond repute
Send a message via Skype™ to Frank Whiton
Default How do I use a Whip Finish Tool

Tutorial courtesy of: Simon Young - Fish&Fly 28/08/2009 09:59:00

Using a Whip Finish tool (right handed tiers ! )
This is a short tutorial on how to use a whip finish tool to form a small neat head on a fly


Click the image to open in full size.

Step 1.
With the tying thread held taut by the bobbin holder in the Left hand and the Whip Finish tool held vertically in the Right hand, place the tool so that the smaller hooked end is BEHIND the thread and the larger sprung curved end is in FRONT of the thread.
Click the image to open in full size.

Step 2.
Tilt the tool toward yourself and hook the smaller tool end around the thread.
Click the image to open in full size.

Step 3.
With the Left hand, bring the thread UP under and into the larger hooked end.
Click the image to open in full size.

Step 4.
With the thread held taut move the Left hand to the left and rotate the tool in the Right hand away from you whilst moving the right hand upward.
Click the image to open in full size.

Step 5.
Continue with the rotation of the tool in the Right hand whilst moving the Left hand up toward the hook shank, the thread from the bobbin holder in the Left hand should be in FRONT of the thread hanging from the head of the fly.
Click the image to open in full size.

Step 6.
Keeping the thread under tension with both hands, continue to move the Right hand up so that the shaft of the Whip Finish Tool is parallel to the hook shank, the thread from the bobbin holder should also be in that position.
Click the image to open in full size.

Step 7.
Still keeping the thread under tension, with the Right hand rotate the Whip Finish Tool so that it wraps a few turns firmly around the head of the fly.
Click the image to open in full size.


Step 8.
Angle the tool slightly toward you and release the smaller hooked end from the thread making sure tension on the thread is maintained with the Left hand

Click the image to open in full size.

Step 9.
Move the Left hand to the left keeping the thread under tension which will reduce the size of the loop of thread formed between the head of the fly and the larger hooked end of the Whip Finish Tool.
Click the image to open in full size.

Step 10.
When this loop has pulled the tool tight toward the fly head slowly slide the tool out of the loop whilst pulling the thread tight with the Left hand to complete the process.
Click the image to open in full size.

Step 11.
Cut the remaining thread from the bobbin holder.
Practice on a bare hook several times to get used to the process.
Tip: Make sure that the thread is under tension at all times
Click the image to open in full size.

Here are some additional photos from Tob1.

Starting after step 8 above.
__________________
Click the image to open in full size.

Last edited by Frank Whiton; 09-13-2009 at 03:51 PM.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On














All times are GMT -5. The time now is 11:18 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0
2005-2014 The North American Fly Fishing Forum. All rights reserved.