The North American Fly Fishing Forum


Go Back   The North American Fly Fishing Forum > General Fly Fishing Discussion > Warmwater Fly Fishing

Warmwater Fly Fishing Bass, Bream, Perch, etc...

Reply
 
LinkBack Thread Tools Display Modes
  #1 (permalink)  
Old 01-16-2013, 02:57 PM
bmbailes's Avatar
Senior Member
 
Join Date: Aug 2012
Posts: 318
bmbailes is just really nicebmbailes is just really nicebmbailes is just really nicebmbailes is just really nice
Default reel sizing for us warmwater guys:)

i just thought about this....say your a warmwater creek, pond, river guy. do you always go with a reel sized for your rod?? in other words, say you buy a 7 wt. rod for bassin...do you buy a 7/8wt. reel to match? im starting to think of down sizing my next reel by at least one size. i dont need tons of backing or a half empty spool from the lack of. bass and panfish....heck even the trout i fish have never got into my backing.

lets hear your thoughts guys
Reply With Quote
  #2 (permalink)  
Old 01-16-2013, 03:11 PM
Senior Member
 
Join Date: Jul 2010
Location: St. Louis, MO
Posts: 1,750
stl_geoff has much to be proud ofstl_geoff has much to be proud ofstl_geoff has much to be proud ofstl_geoff has much to be proud ofstl_geoff has much to be proud ofstl_geoff has much to be proud ofstl_geoff has much to be proud ofstl_geoff has much to be proud ofstl_geoff has much to be proud of
Default Re: reel sizing for us warmwater guys:)

I tend to pair the reel size based off pysical size of the reel itself if its a heavier rod. For the smaller reels and lighter weight rods, I tend to go with smaller reels for creeks because of the reason you mentioned, no need for lots of backing. However if Im in a creek where I know I have a shot at carp i will bring a heavier rod then normal with lots of backing as a just in case.
__________________
"When you do things right, people wont be sure you've done anything at all."

Storm Drain Bonefisher
Reply With Quote
  #3 (permalink)  
Old 01-16-2013, 07:16 PM
Senior Member
 
Join Date: Oct 2011
Posts: 539
ditz will become famous soon enoughditz will become famous soon enough
Default Re: reel sizing for us warmwater guys:)

What ever size reel I use I will make sure the reel is full so I put backing on all my reels. Do I need the backing? Mostly no but you never know and it is better for the fly line to not be would up tight on a small arbor. I will say that I generally use reels a little larger than needed. I prefer a loaded reel to slightly over balance the rod.
Reply With Quote
  #4 (permalink)  
Old 01-16-2013, 10:27 PM
Senior Member
 
Join Date: Sep 2006
Location: Maryland
Posts: 1,442
bigjim5589 has much to be proud ofbigjim5589 has much to be proud ofbigjim5589 has much to be proud ofbigjim5589 has much to be proud ofbigjim5589 has much to be proud ofbigjim5589 has much to be proud ofbigjim5589 has much to be proud ofbigjim5589 has much to be proud ofbigjim5589 has much to be proud ofbigjim5589 has much to be proud of
Default Re: reel sizing for us warmwater guys:)

I've never given much thought to going smaller with a reel, and generally stick to reels that are sized for the rod/line. Balance as ditz has said is something to consider. I don't want my rod to feel top heavy, and like him prefer a bit of over balance on the reel end. I have come to prefer large arbor reels too, simply because of the fact is helps reduce those tight loops of line on the reel, and of course aids in retrieving line a little faster.

For the most part, I want a reel that has more capacity than I may need, because my reels do double duty, for warmwater & tidalwater, where I may encounter fish species that warrant the additional backing, so I use reels that are made for that rod/line sizing or a larger reel.

My 10 wt has an 11/12 wt reel on it for that very reason. I may never need the extra backing, but it's there in case I do.

I guess you have to make a judgement whether or not you really need the size reel or can make due with a smaller reel.
__________________
My Blog: http://tidewaterflyblog.blogspot.com

Remember, no one likes to be behind the big truck, but that's better than being under it!
Reply With Quote
  #5 (permalink)  
Old 01-17-2013, 07:30 AM
wabi's Avatar
Senior Member
 
Join Date: Jan 2011
Location: southern Ohio
Posts: 520
wabi is just really nicewabi is just really nicewabi is just really nicewabi is just really nicewabi is just really nice
Default Re: reel sizing for us warmwater guys:)

I've found reel capacity can vary greatly from one manufacturer to the next, and even quite a bit between reel models. One rated 3/4 may hold plenty of line & backing for a 4wt and another brand/model may be filled with just a 4wt line alone.
I tend to lean toward picking a size that will hold plenty of backing. For a 3wt rod I may go with a 3/4 or even a 4/5 if I'm unsure.
__________________
Mike
Reply With Quote
  #6 (permalink)  
Old 01-18-2013, 03:29 PM
Member
 
Join Date: Nov 2012
Posts: 16
revor is on a distinguished road
Default Re: reel sizing for us warmwater guys:)

New guy here.
I normally put a number two reel on a 5-6-7 wt rod and a 3 on a 7-8-9 wt rod etc. but a recent foray into the world of split bamboo is making me think about another aspect of the fly fishing "system" and that is balance. An example would be my Phillipson 9' 6wt. It's a heavy rod compared to my graphite sticks. When I put a #2 reel on it it feels mighty front heavy with a #3 it seems much better..
Reply With Quote
  #7 (permalink)  
Old 01-19-2013, 12:30 PM
Senior Member
 
Join Date: Oct 2011
Posts: 539
ditz will become famous soon enoughditz will become famous soon enough
Default Re: reel sizing for us warmwater guys:)

Revor....If you are looking for more weight in a reel but not more size you might try one of the new Pfleuger Medalists. The 1500 series are heavier than the 1400 series reels and but they have an exposed rim. The original USA made reels were the best but no longer available new. They then went to Japan and they were real junk. For the last few years they have been made in China (which upsets me) but the quality approaches the USA made reels. I have 3 of the new China reels and they are very serviceable and I believe they will last many years of heavy use and abuse.
Reply With Quote
  #8 (permalink)  
Old 01-19-2013, 12:43 PM
turbineblade's Avatar
Senior Member
 
Join Date: Jul 2012
Location: NA
Posts: 746
turbineblade is just really niceturbineblade is just really niceturbineblade is just really niceturbineblade is just really nice
Default Re: reel sizing for us warmwater guys:)

I tend to just use whatever matches the rod (or was sold with the combo).

I never require backing and just use it to take up space and keep the fly line from wrapping in tiny, kinky loops on the arbor.

I really don't think fly reels are very important for trout and most warmwater fishing. Just put one on, spool it, and forget about it.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Wading Boot Sizing comeonavs Other Gear 21 02-02-2013 09:16 PM
Wading boots Sizing question romanl General Discussion 13 10-16-2012 09:59 PM
Bead Sizing seajay General Fly Tying Discussions 1 11-21-2011 12:57 PM
Wooly Bugger Sizing? rjw Coldwater Fly Fishing 9 10-17-2011 04:52 PM
Question about wader sizing. Trinity General Discussion 7 07-08-2009 09:46 AM













All times are GMT -5. The time now is 02:38 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0
2005-2014 The North American Fly Fishing Forum. All rights reserved.