Home | Fly Fishing Features | Fly Tying | How to use a whip finish tool

How to use a whip finish tool

By
Font size: Decrease font Enlarge font
Fly Tying basics - How to use the whip finish tool Fly Tying basics - How to use the whip finish tool

This is a short tutorial on how to use a whip finish tool to form a small neat head on a fly

Using a Whip Finish tool (right handed tiers ! )

Step 1.

With the tying thread held taut by the bobbin holder in the Left hand and the Whip Finish tool held vertically in the Right hand, place the tool so that the smaller hooked end is BEHIND the thread and the larger sprung curved end is in FRONT of the thread.

Whip_Finish__1__532560860.jpg

Step 2.  

Tilt the tool towards yourself and hook the smaller tool end around the thread.

Whip_Finish__2__283010814.jpg

Step 3.   

 With the Left hand, bring the thread UP under and into the larger hooked end.

Whip_Finish__3__638312155.jpg

Step 4. 

With the thread held taut move the Left hand to the left and rotate the tool in the Right hand away from you whilst moving the right hand upwards.

Whip_Finish__4__557361737.jpg

Step 5.   

Continue with the rotation of the tool in the Right hand whilst moving the Left hand up towards the hook shank, the thread from the bobbin holder in the Left hand should be in FRONT of the thread hanging from the head of the fly.

Whip_Finish__5__756287075.jpg

Step 6.   

Keeping the thread under tension with both hands, continue to move the Right hand up so that the shaft of the Whip Finish Tool is parallel to the hook shank, the thread from the bobbin holder should also be in that position.

Whip_Finish__6__824518211.jpg

Step 7.   

Still keeping the thread under tension, with the Right hand rotate the Whip Finish Tool so that it wraps a few turns firmly around the head of the fly.

Whip_Finish__7__342246168.jpg

Step 8.   

Angle the tool slightly towards you and release the smaller hooked end from the thread making sure tension on the thread is maintained with the Left hand.

 

 

Whip_Finish__8__728717734.jpg

Step 9.  

Move the Left hand to the left keeping the thread under tension which will reduce the size of the loop of thread formed between the head of the fly and the larger hooked end of the Whip Finish Tool.

Whip_Finish__9__135977568.jpg

Step 10.

When this loop has pulled the tool tight towards the fly head slowly slide the tool out of the loop whilst pulling the thread tight with the Left hand to complete the process.

Whip_Finish__10__364228166.jpg

Step 11.Cut the remaining thread from the bobbin holder.

Practice on a bare hook several times to get used to the process.

Tip: Make sure that the thread is under tension at all times

Whip_Finish__11__546674390.jpg






Articles by the same author






Comments (5 posted):

Pocono on 12/09/2009 21:21:44
avatar
Here's a question on proper use of the whip finish tool. I use a Matarelli, but I think that the answer will be the same for the finisher that's used in the thread. The question, taken from step #7 in the whip finish FAQ, is: which way do you wrap the thread; from the bend towards the eye or from the eye towards the bend? Or, does it matter? Might as well tip my hand: I wrap from the eye towards the bend; 4-5 wraps/ doubled.
Frank Whiton on 12/09/2009 21:32:01
avatar
Hi Pocono, I wrap from the starting point toward the hook eye. Frank
butchhe on 12/09/2009 21:41:13
avatar
Being a noob at tying, using the whip finisher is probably the most frustrating part for me. I have a habit of making the wraps come off the shank and wind up with 4-5 twists in the thread. I then have to unwrap it and pray the none of the other wraps come undone. Very frustrating! :mad:
tob1 on 13/09/2009 12:03:05
avatar
Here is one other way from step8. Trygve;)
Taskienne on 14/09/2009 21:56:53
avatar
Hello, you can this this knot just with your hand, it's easy ; I'll take photos to show... Ciao.
Add/View Comments
  • Email to a friend Email to a friend
  • Print version Print version
  • Plain text Plain text

Tagged as:

fly tying, whip finish

Rate this article

5.00

Follow NA Fly Fishing Forums!