View Single Post
Old 07-10-2013, 05:22 PM
reidsisk reidsisk is offline
Join Date: Aug 2012
Posts: 75
reidsisk will become famous soon enough
Default Re: Hanging up in Lily Pads

Originally Posted by nick k View Post
Here are the two pics I said I'd post, along with tying instructions and my fishing techniques with them.

This is the baby bass style bend back.
Tying steps (bottom to top):
Bend Hook
White buck tail
Thin line of black buck tail for the bass's lateral line
Copper flash extending past buck tail
Olive buck tail.
If you want to spice it up you can add red flash for the gills as shown in the big one.
Click the image to open in full size.

This is my version of the Fatal Attraction fly ind bend back form. I use it to imitate small bluegill or pumpkinseeds that the bass feed on.
Tying steps (bottom to top):
Bend hook
Wrap hook from bend to eye in silver flash
Yellow buck tail
Green flash
Neon green/chartreuse buck tail
Small amount of olive buck tail
Peacock herl
As with the first pattern, you can add red flash for gills at the end if you want
I try to keep these in a stumpy triangular shape since sunfish are not long and slender like many fish.
Click the image to open in full size.

Some of the areas around my have a lot of vegetation and especially a lot of lily pads. With these flies, I can throw it square in the middle of a big salad pile and strip it right through. It will even skate on top of the lily pads if it has to.

The most important thing to remember when using bend backs is to go slow when stripping through vegetation (if you can). Many people assume that pulling it through fast will be better but in reality this exposes the hook more and will give you a greater chance of actually catching the weeds.

When I build my bend backs, I like the hook point to be about 1/8 of an inch below the top portion of material (excluding anything flying way up when its dry like the peacock herl in the Fatal Attraction. You want the hook point to slide through the remaining material easily during a take, but not too easily that it exposes itself constantly around vegetation.

*Special Note* - When bending the hook for these types of flies, get a nice wide, flat pair of plies (preferably the type without grooves in the jaws). When clamping down, put the entire hook eye down to the point you want to bend within the jaws. What I mean by this is that the pliers should be on the same plane as the fly, pointing down the shank of the hook. This ensures that you wont break the eye or crack the shank while you bend.
Now this is a fly i need to try.. I am terrible at tying though.. It looks like a mean bass fly to me!
"A government big enough to give you everything you need, is a government big enough to take away everything that you have...."
Reply With Quote