Thanks Thanks:  0
Likes Likes:  2
Dislikes Dislikes:  0
Results 1 to 4 of 4

Thread: Bend backs (Baby Bass and Fatal Attraction)

  1. #1
    Join Date
    Jan 2013
    Brookline, MA

    Default Bend backs (Baby Bass and Fatal Attraction)

    These are two flies I posted on a thread in the Warmwater section. I thought I'd post them here as well in case anyone was looking for bend back patterns.

    This is the baby bass style bend back.
    Tying steps (bottom to top):
    Bend Hook
    White buck tail
    Thin line of black buck tail for the bass's lateral line
    Copper flash extending past buck tail
    Olive buck tail.
    If you want to spice it up you can add red flash for the gills as shown in the big one.

    This is my version of the Fatal Attraction fly in bend back form. I use it to imitate small bluegill or pumpkinseeds that the bass feed on.
    Tying steps (bottom to top):
    Bend hook
    Wrap hook from bend to eye in silver flash
    Yellow buck tail
    Green flash
    Neon green/chartreuse buck tail
    Small amount of olive buck tail
    Peacock herl
    As with the first pattern, you can add red flash for gills at the end if you want
    I try to keep these in a stumpy triangular shape since sunfish are not long and slender like many fish.

    Some of the areas around me have a lot of vegetation and especially a lot of lily pads. With these flies, I can throw it square in the middle of a big salad pile and strip it right through. It will even skate on top of the lily pads if it has to.

    The most important thing to remember when using bend backs is to go slow when stripping through vegetation (if you can). Many people assume that pulling it through fast will be better but in reality this exposes the hook more and will give you a greater chance of actually catching the weeds.

    When I build my bend backs, I like the hook point to be about 1/8 of an inch below the top portion of material (excluding anything flying way up when its dry like the peacock herl in the Fatal Attraction). You want the hook point to slide through the remaining material easily during a take, but not too easily that it exposes itself constantly around vegetation.

    *Special Note* - When bending the hook for these types of flies, get a nice wide, flat pair of pliers (preferably the type without grooves in the jaws). When clamping down, put the entire hook eye down to the point you want to bend within the jaws. What I mean by this is that the pliers should be on the same plane as the fly, pointing down the shank of the hook. This ensures that you wont break the eye or crack the shank while you bend.
    Last edited by nick k; 07-12-2013 at 07:43 AM.

  2. #2

    Default Re: Bend backs (Baby Bass and Fatal Attraction)

    They are inspirational.
    I am highly qualified to comment in this forum after receiving a Specialized High Intensive Training (S.H.I.T) at the Olde Schitt Institute of Technology (O.S.H.I.T).

  3. Likes nick k liked this post
  4. #3
    Join Date
    Jul 2010
    St. Louis, MO

    Default Re: Bend backs (Baby Bass and Fatal Attraction)

    I think Im gonna tie up a couple of these tonight while down at the desk.
    "When you do things right, people wont be sure you've done anything at all."

    Storm Drain Bonefisher

  5. Likes nick k liked this post
  6. #4
    Join Date
    Jan 2013
    Brookline, MA

    Default Re: Bend backs (Baby Bass and Fatal Attraction)

    If anyone is looking for the real Fatal Attraction pattern and a walkthrough, this link will bring you there.

    The website in the link is also chock full of GREAT warm water fly fishing and fly tying info. There's tons of great patterns with full picture step by step instructions for each one. I would highly recommend the site to anyone. It is by Ward Bean.

Similar Threads

  1. Replies: 0
    Last Post: 01-02-2012, 04:20 PM
  2. Fun with Baby Bass
    By Stan Wright in forum Pacific Southwest
    Replies: 2
    Last Post: 11-19-2010, 01:09 AM
  3. Baby Backs on the 4th
    By paymaster in forum The Lodge Den
    Replies: 8
    Last Post: 07-06-2010, 06:59 AM
  4. baby bass streamer
    By rmooney in forum Share Patterns
    Replies: 5
    Last Post: 12-17-2009, 04:08 PM
  5. Replies: 1
    Last Post: 10-24-2008, 06:30 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts