The North American Fly Fishing Forum

The North American Fly Fishing Forum (
-   Fly Patterns (
-   -   Royal Coachman Hairwing SBS (

s fontinalis 09-24-2012 10:25 AM

Royal Coachman Hairwing SBS
After I tied the Royal Coachman wet fly a couple weeks back I got the notion to look for other variations of the same fly. I saw many variations of the hairwing version, and decided to have a go at tying one of my own using some of the elements I'd seen in other flies.

Materials as follows

Hook: TMC 7999 size2 (or your hook of choice)
Thread: Red Danville Flymaster 6/0
Tail: GP tippets
Body: In thirds; Peacock Ice Dub, Red Ultra Wire (Lg), Peacock Ice Dub
Wing: White Arctic Fox guard hairs
Hackle: Red GP body feather dyed claret (This came from a custom dyed skin, you can use a natural red GP feather or even a large brown hen hackle)
Head: Red

1. Start your thread behind the eye; wind to the back of the hook, just past the point and tie in your GP tippets. The middle bar should extend at least to the bend of the hook, but not past it.

2. Move the thread to about 1/3 the way up the shank, make a dubbing noodle and dub the peacock ice dub back to the tail and then forward to the start of the dubbing. This creates a nice thickish body.

3. Take a piece of Ultra wire, about 6", and tie it in so the end stops at the return of the hook eye. This creates a nice even under body and helps to bulk it out.

4. Wind the wire forward. If it goes to the return of the hook eye, stop there and you can put the ice dub back over it. if it doesnt reach the eye return, make sure it is at least as 1/3 the body length. If its too short, unwrap and rewind with a new piece of wire.

5. Dub a second noodle of ice dub and form the body as before, starting at the front, wind back to the wire (or over it) and forward again to the eye.

6. Take a nice thick clump of arctic fox guard hairs. The tips (in my fingers) will be much thinner than the base which includes the under fur (pictured)

7. Holding the guard hair tips firmly, with your other hand stroke the base of the arctic fox to remove the soft underfur. You can keep the underfur for dubbing other flies if you desire. You should end up with something like this at the butts of the arctic fox fur

8. Tie in the butt ends, and allow the main wing to extend to about the middle bar of the tail. If some hairs are long thats fine.

9. Snip the butts close after tie in, making sure to leave enough space so the eye isn't crowded.

10. Tie in your hackle by the tips with 7 or 8 tight wraps

11. Wind the hackle. If you use GP you should only get about 3 or 4 wraps max. When finished, form a neat head and whip finish. Coat 3 or 4 times with cement or Sally's and your fly is done


dean_mt 09-24-2012 10:52 AM

Re: Royal Coachman Hairwing SBS
Great SBS, Eunan. And a sweeet fly too!

la_jolla1 09-30-2012 03:41 PM

Re: Royal Coachman Hairwing SBS
Fun SBS, played with what I had at hand.

Thanks for putting it up

thorsten 10-01-2012 02:41 PM

Re: Royal Coachman Hairwing SBS
Good job - Congratulations!!

All times are GMT -5. The time now is 01:03 AM.

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Search Engine Optimisation provided by DragonByte SEO v2.0.40 (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
2005-2017 The North American Fly Fishing Forum. All rights reserved.