Thanks Thanks:  0
Likes Likes:  13
Dislikes Dislikes:  0
Page 2 of 4 FirstFirst 1234 LastLast
Results 11 to 20 of 34

Thread: 2-piece blanks

  1. #11

    Default Re: 2-piece blanks

    Three more wraps, but extra layers of graphite on each ferrule also not to mention the larger diameters of the blank necessary to accomodate the male section! One of the big selling points seems to be the lighter weight and smaller diameters and the favorable effects these have on rod performance, so going from a 2-piece to a 4-piece seems counterproductive to me.

  2. #12
    Join Date
    Nov 2009
    White City (tad north of Medford) Oar-E-Gone

    Default Re: 2-piece blanks

    Quote Originally Posted by fyshstykr View Post
    There is still a few around.
    Batson Enterprises - Fly Blanks

    And Gary Loomis is making 2 piece rods at his new company named North Fork Composites.

    For some reason I cannot find his site but here is a video link Gary discussing blank manufacturing.
    -North Fork Composites Custom Rod Blanks Video (Gary Loomis)- Oregon Steelhead Salmon and Trout Fishing
    Here you go (for North Fork Composites): North Fork Composites | Designed by Gary Loomis - Today. Yesterday. Tomorrow.
    When wealth is lost, nothing is lost; when health is lost, something is lost; when character is lost, all is lost. - Billy Graham"

  3. #13

    Default Re: 2-piece blanks

    I ended up getting a couple of G Loomis GLX Classic 2-piece rods from a seller on Ebay. $466 shipped for a 9', 6wt and a 9', 8wt shipped! They are like new and I'm going to yard test them tomorrow!
    Since everyone wants a 4-piece now, the used two-piece rods are going cheap on Ebay!

  4. #14
    Join Date
    Jun 2008
    Lake of the Woods/Rainy River Minnesota Canada border

    Default Re: 2-piece blanks

    Quote Originally Posted by FlyFlinger2421 View Post
    Well, I looked at 4 piece rods by a number of manufacturers today and every one had thead wraps on each of the female ferrules! This indicates to me that the female ferrules are a weak spot. Each ferrule also adds weight which detracts from the action, decreases the dampening of the rod and negates the weight savings resulting from the use of brittle, high modulus graphite. I see a number of negatives and only one advantage: the case is easier to pack! As for that, I like to put mine in a lightweight PVC tube and use it as a hiking staff. It comes in handy when hopping from rock to rock crossing small streams
    Am I wrong?
    They are not weaker, there is no disadvantage. I build rods and own a ton of 4 pc. rods. My two hand rods which take far more stress than any little rod you are going to use and make them look like toys are all 3 and 4 pc. So wrong wrong wrong, and then....wrong.
    Quote Originally Posted by FlyFlinger2421 View Post
    Doesn't anyone make 2-piece blanks anymore? Sage doesn't, Loomis doesn't, St. Croix doesn't.........
    I guess I will just have to live with the rods I have!
    I have not checked the other makers yet but St. Croix does make 2 pc. blanks. So again, wrong.

    Back to ignore mode, which I only broke to stop bad info from spreading.
    Last edited by Guest1; 08-12-2012 at 02:47 AM.

  5. #15

    Default Re: 2-piece blanks

    Dan, with all due respect, if you are going to dis what someone says, please address the points made.
    Again, if the ferrule is not a weak point, why do the manufacturers wrap the female ferrules?
    I just measured the diameter of my GLX at the tip of the male ferrule. It is 0.206". The female ferrule diameter (just above the thread wrap) is 0.275. Would you agree that the female ferrule is larger diameter, Dan? Would you also agree that a larger diameter tube is more rigid than a smaller diameter tube and that a larger diameter tube needs to have a thinner wall to be as flexible as the smaller diameter tube, assuming the same material is used?
    Finally, I determined how far up the tip from the end of the female ferrule I had to go to get back to the same diameter as the tip of the male ferrule: the distance was 13". So, for a distance of at least 13" the rod diameter is greater than it would have been had there not been a ferrule. Now, the only way a blank maker can create the proper action in this rod, it seems to me, is to make that 13" section of the tip thinner or change to a lower modulus, heavier material. Is this statement wrong, wrong, wrong, Dan?
    That still leaves us with the ferrule itself, which, I think you will agree, Dan, is definitely thicker walled as well as a much larger diameter. This alone adds weight.
    Does all this make any real difference? Perhaps not, but for me, assembling all those pieces and aligning them properly just takes more time and I can't see where 3 ferrules can possibly IMPROVE the action of a fly rod! Of course I do most of my travelling in an SUV so a 5 foot rod case isn't a problem. On my Alaska trips I simply ship the rods to my destination ahead of time. This summer I shipped 5 rods, insured, for less than $25.

    As for the Name Brand rods being all 4 piece, you are correct. I was referring to their "top end" rods. They do still make 2-piece rods for the entry level angler and these are likely better than my older "top end" 2 piece rods from the days of yore when the RPL reigned supreme!

    P.S. Checking all of my posts to make sure I don't "spread bad information" is not really ignoring me, Dan.
    Am I wrong?

  6. #16

    Default Re: 2-piece blanks

    If you want 2 piece rods, go for it. I know some people do prefer them. Some companies offer them, and if enough folks want 2 piece over 4 piece then more companies will make more of them. Lack of options in 2 piece rods just speaks to the market. I don't think I'll buy a 2 piece again. My understanding is that in the past ferrules created problematic flat spots but the technology has improved and helped correct this problem. Perhaps someone more knowledgeable can speak to it.

    The slight weight difference is of zero concern to me, I don't worry about a weak spot as the ferrules are wrapped for strength (I believe some blank manufacturers say you don't need to wrap theirs anyways), and I really value the space saving on my garage storage shelf and in the back of my car. I can fit the rods, but like having the tubes take up less space. I find the longer tube of my bamboo rod annoying personally, but love the rod. I never found putting the rod together to be any kind of trouble when I get to the river.

    In short, 4 piece rods might be problematic for you, but they aren't for me.

  7. #17
    Join Date
    Nov 2009
    White City (tad north of Medford) Oar-E-Gone

    Default Re: 2-piece blanks

    Only been half paying attention to this thread but the last few postings caught my attention. Went out to the garage to check (eye-ball) most of a lives collection of rods. Stock, custom, etc. In each and every case the female bit was thread wrapped.

    Always thought this was for 'esthetics' but as it was universal it would appear not.
    When wealth is lost, nothing is lost; when health is lost, something is lost; when character is lost, all is lost. - Billy Graham"

  8. #18

    Default Re: 2-piece blanks

    Ferrules are certainly a weak spot, but the amount of thread and epoxy is negligible insofar as weight is concerned.

    As far as flex and taper design, perhaps early versions of 4 piece rods were insufficient, but modern rods (if made be a reputable manufacturer) always ALWAYS compensate for this, and I don't think you or I or any human will feel a difference in a blind test.

    Here's the catch for me: 3 connection points vs. 1 mean 2 more opportunities for something to go wrong. Maybe that third ferrule was wrapped too tightly. Maybe one of the 3 connections came a little loose during travel to your next river access and you didn't notice - that nice tree you just hooked turned your 4 piece into a 5 piece. Or maybe that blasted tip piece is misaligned and you just can't reach it to turn it straight without setting your rod down....

    I still own all 4 pieces though... It's amazing how small that 4 piece 7'6" packs.

    Tight lines and tight ferrules.


  9. #19

    Default Re: 2-piece blanks

    I couldn't agree more. If you need convenience, can't tell the difference in action or fishability between a 4 piece and a 2 piece rod, and are not concerned about potential ferrule problems, buy the 4 piece. I am just pointing out the types of problems that ferrules create and that more ferrules do nothing to improve the rod's action or fishability.

    Here is the answer to a FAQ concerning ferrule wraps on

    "Yes, you should make what is known as a "ferrule reinforcement wrap" on all ferrules, both the tip-over-butt style and the
    spigot/plug style. Use A thread and wrap tightly for a length that is equal to roughly twice the diameter of the ferrule opening. Make sure to get the wrap close to the edge, within 1mm if possible, as this is were any split-out would begin."

    Here is another regarding ferrules from Rodmaker Magazine:

    "The wrap tension on a ferrule reinforcement wrap should be a fair bit more snug than on a guide wrap. The idea here is to provide a bit of hoop strength for the ferrule, and to prevent a split out from occuring at the edge of the ferrule. Although most manufacturers include some sort of reinforcement wrap on this critical juncture, most also continue to recommend that a thread reinforcement wrap be made as well, regardless of the type ferrule used. On tip-over-butt ferrules or butt-into-tip types, the female ferrule requires a wrap. On spigot (plug) ferrules, both the male and female ferrules should be wrapped.

    To make things a bit easier for you, I would suggest starting your wrap away from the ferrule edge and wrapping towards that edge. You may need to insert the but/tip section into the ferrule opening in order to support the open end of the ferrule. Make the insertion depth before wrapping and take care that your wrapping tension is not so tight as to constrict the female ferrule opening to the point where you cannot fully seat the ferrule.

    Make sure to wrap almost to the very edge of the ferrule, at least within 1mm to 2mm, since split-outs start at the very edge. Many builders debate how long the wraps should be, and in my opinion, most make the reinforcement wraps much too long. For years I settled on a formula having the length being twice the outside diameter at the ferrule opening and have an absolutely zero failure rate at the ferrule. If you do not feel comfortable with this, I suggest calling the manufacturer of your particular blank and asking for their recommendation as to the ferrule reinforcement wrap length which should be used.

    I would also like to make a suggestion to any of the blank manufacturers who do not indicated such in or on their blank packaging, to kindly instruct the builder as to whether or not such a reinforcement wrap is necessary, and how long it should be. Doing so might help prevent many failed blanks from being returned for replacement. ~ Tom Kirkman"
    Last edited by FlyFlinger2421; 08-13-2012 at 09:28 AM.

  10. #20
    Join Date
    Jul 2011
    Holliston, MA, USA

    Default Re: 2-piece blanks

    FYI, you can get a 2pc 8'6" T & T Horizon II Saltwater 13wt blank for a sweet price at Madison River Fly Shop right now. You want ferrule strength? I suspect that blank will have all kinds of strength to spare.

    Also TFO 8 and 10wt signature blanks, both 9' if you happen to be interested.

    Again, just FYI.

Page 2 of 4 FirstFirst 1234 LastLast

Similar Threads

  1. 10' 3 and/or 4wt Blanks
    By FlyBum in forum Fly Rod Building
    Replies: 8
    Last Post: 11-20-2012, 10:25 PM
  2. Replies: 0
    Last Post: 07-19-2012, 06:20 PM
  3. Sites for rod blanks?
    By oaktree_1776 in forum Fly Rod Building
    Replies: 4
    Last Post: 07-06-2011, 10:29 PM
  4. Are some Redington blanks Sage blanks?
    By dorian.ducker in forum Fly Rods
    Replies: 26
    Last Post: 02-11-2008, 05:07 PM
  5. IM6 Blanks
    By burns in forum Fly Rods
    Replies: 2
    Last Post: 10-16-2007, 06:52 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts