Thanks Thanks:  0
Likes Likes:  3
Dislikes Dislikes:  0
Page 1 of 2 12 LastLast
Results 1 to 10 of 15

Thread: WTF Happened to My Wraps?

  1. #1

    Default WTF Happened to My Wraps?

    I built this rod over the winter and have been using it since then. The last time I went out I noticed that I had 1 set of wraps that were milky white, while the rest of my wraps look normal. WTF caused this? What do I need to do to prevent it? Do I need to redo the wraps or is it only cosmetic?

    Milky White Wraps


    Good Wraps

  2. #2
    Join Date
    Jan 2013
    Location
    Central Coast of Calif
    Posts
    321

    Default Re: WTF Happened to My Wraps?

    Looks like moisture got under them. Is there a small gap between the finish and guide or the finish and the blank? Those are the two spots where moisture can migrate under the finish and screw up everything. Pretty much the same thing Steeldrifter mentioned on the other board.

    Pete
    "Blessed is the fly fisher who's quiver contains grass, glass & graphite custom rods." Book of Rods 3:16

  3. Likes williamhj liked this post
  4. #3

    Default Re: WTF Happened to My Wraps?

    I looked at everything under a magnifying glass and did not see any gaps.








    Is there anything else that can cause this? Should I redo them or is my rod ok?

  5. #4

    Default Re: WTF Happened to My Wraps?

    In your last post, with the three pictures, I'd almost guess that there could be a leak in the very front where the thread meets up to the guide (picture two) left half of the guide. Just a guess, mind you. I'd suggest taking off the epoxy and wraps from this guide, making sure when you are wrapping it that it is totally dry (color preserver?), and very carefully re-epozy-ing the wrap, taking care to begin and end smoothly and completely, especially where the thread meets the metal.
    Don't look back ... we ain't goin' that way!

  6. #5
    Join Date
    Oct 2007
    Location
    Wasilla / Skwentna, Alaska
    Posts
    15,251
    Blog Entries
    111

    Default Re: WTF Happened to My Wraps?

    My guess is that this may have been the first wrap done, meaning it got the thread from the top of the spool. The thread itself may have been moist / damp. The under layers of thread from the spool used on the other wraps may have been drier.

    The second thing that I have seen that will cause this is if you apply multiple coats of finish before the first coat is thoroughly dry. During the curing process various solvents and a very small percentage of moisture rise to the surface of most finishes as the chemical reaction that we call drying takes place. If we apply a second coat before the solvents and etc have completely dried we trap them beneath the second coat.

    This can happen with the finish on the heads of salmon & streamer flies also.

    Ard

    ---------- Post added at 08:32 AM ---------- Previous post was at 07:07 AM ----------

    I saw the 'Like' on that Auntie Em,

    Do you think that's a possibility? have you ever had the problem with rushed second coats?

    I've had it happen and should have known better. I ran a restoration business for many years and we dis a lot of historical work. It was very important to allow coats of varnish - lacquer - or polyurethane to dri fully between coats or you could have this 'milky' appearance happen to finished wood surfaces too.

    Anywhere can be the land of great expectations, broken dreams, or paradise found, it's all up to you.

    Life On The Line - Alaska Fishing with Ard
    Ard's Forum blog, Alaska Outdoors

  7. Likes Auntie Em liked this post
  8. #6

    Default Re: WTF Happened to My Wraps?

    The thing is it happened after 6 months of use. I guess I'll never really know what caused it. I'm just going to remove the wrap and guide and redo it.

  9. #7
    Join Date
    Oct 2007
    Location
    Wasilla / Skwentna, Alaska
    Posts
    15,251
    Blog Entries
    111

    Default Re: WTF Happened to My Wraps?

    I've seen finish hold up for months before the problem sets in. What happens is time. Time and or UV.

    Anywhere can be the land of great expectations, broken dreams, or paradise found, it's all up to you.

    Life On The Line - Alaska Fishing with Ard
    Ard's Forum blog, Alaska Outdoors

  10. #8
    Join Date
    Sep 2006
    Location
    Manning, S. C. (formerly MD)
    Posts
    2,980

    Default Re: WTF Happened to My Wraps?

    I don't do any rod building, but have had that milky appearance on fly heads while tying flies.

    Once, I found out that certain types of wax don't work well with some head cements or epoxy. I was using waxed thread & solved the problem by going to unwaxed.

    The other time I had it happen I had gotten "something" oily on my fingers, which transferred to the thread. I noticed a stain under the finish. When I tie now, I make a point of washing my hands thoroughly before tying & making sure my tying area is clean & of course dry.

    IMO, unless you intend to sell the rod, and the guide is secure, I would leave it alone & use it as is & wait to see if it gets worse. It appears to be a cosmetic issue only at this point.
    Remember, no one likes to be behind the big truck, but that's better than being under it!

  11. #9

    Default Re: WTF Happened to My Wraps?

    Ard,
    I have had this happen on flies, and furniture finishing.

    Had "something" happen on a couple wraps early on in my rod crafting, usually after the rod had been dunked, so I figured it was a leak somewhere. Rather than chance anything worse happening while miles from home, I changed the wraps out.

    Moisture is not the friend of epoxy. Nor are oily fingers, wax, dust, ... ahhh, the list goes on and on!!
    Em
    Don't look back ... we ain't goin' that way!

  12. #10
    Join Date
    Jan 2012
    Location
    Pocono Lake , Pennsylvania
    Posts
    3,173

    Default Re: WTF Happened to My Wraps?

    Ive seen this happen with older spools of thread the kind you used to use color preserver with. Thread that comes from a shop where it is left open may come in contact with all kinds of things! A worker in my shop was spraying bug spray all over the place one time and the owner went crazy on him! Just think what that residue could do to all exposed spools of thread in the shop!
    "I was born to fish" Lee Wulff
    "There's more B.S. in fly fishing then there is in a Kansas feedlot." Lefty Kreh
    " It ain't over till it's over." Yogi Berra
    "Your not old,you've simply acquired a patina." Swirlchaser

Page 1 of 2 12 LastLast

Similar Threads

  1. SBS Decorative Wraps
    By swirlchaser in forum Fly Rod Building
    Replies: 21
    Last Post: 12-17-2014, 03:10 PM
  2. Are my thread wraps too long?
    By nick k in forum Fly Rod Building
    Replies: 14
    Last Post: 07-01-2013, 09:05 AM
  3. Butt wraps on a fly rod
    By swirlchaser in forum Fly Rod Building
    Replies: 8
    Last Post: 02-10-2012, 10:03 AM
  4. Test Wraps
    By auntrout in forum Fly Rod Building
    Replies: 11
    Last Post: 02-01-2012, 03:37 PM
  5. This really happened to me
    By EXPATRIATE in forum Fly Fishing Humor
    Replies: 6
    Last Post: 03-29-2011, 12:31 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •