Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 7 of 7

Thread: Tapered leader or Tippet material

  1. #1

    Default Tapered leader or Tippet material

    Is it necessary to use a tapered leader to attach to the fly line, or can I just use tippet material. If not what is the benefit of the tapered leader?

  2. #2

    Default Re: Tapered leader or Tippet material

    A tapered leaders helps in turning the fly over. When you just have tippet material, you're going from a strong, relatively stiff fly line straight to a weak, limp tippet. The tippet doesn't transfer the energy from the fly line out to the fly as well.

    If you're using a big fly, and heavy tippet, you can usually get away with it, but if you're trying to toss tiny flies on light tippet, you'll want a leader of some kind.

    Make sense?

  3. #3
    Join Date
    Jul 2008
    Location
    quiet corner, ct
    Posts
    8,502

    Default Re: Tapered leader or Tippet material

    hey Big Don
    This is a frequently asked question and has been addressed in the fly fishing FAQ section, the next section down on the main forum page
    Hope this helps
    http://www.theflyfishingforum.com/fo...ame-thing.html
    The simpler the outfit, the more skill it takes to manage it, and the more pleasure one gets in his achievements. --- Horace Kephart

  4. #4
    Join Date
    Mar 2008
    Location
    Pinedale, WY
    Posts
    18,762
    Blog Entries
    50

    Default Re: Tapered leader or Tippet material

    bigdon90: +1 for what poke em stated. You should try casting out in the backyard. First attach a 9 ft tapered leader to your fly line and on the far end attach a small piece of yarn. Then make serveral casts and pay attention to how the leader turns the yarn over. Now take that the leader off and attach the same length of tippet, you should notice quite a difference in how the yarn turns over.

    Larry
    Larry


  5. #5
    Join Date
    Feb 2011
    Location
    Rock River, Wyoming
    Posts
    527

    Default Re: Tapered leader or Tippet material

    Quote Originally Posted by bigdon90 View Post
    Is it necessary to use a tapered leader to attach to the fly line, or can I just use tippet material. If not what is the benefit of the tapered leader?
    As is indicated you can use tippet or any level monofilament as a leader but your fly presentation will suffer greatly. The tippet serves several purposes and it's the final link before your fly. Two feet of tippet is about right for starts and it should always be of less strength than your fly line backing. When considering the range of species targeted with the fly rod and the range of rod sizes, we find tippets ranging from the 8X teensie tiny fly tippet all the way up to 22 lb test. For trout and most freshwater species you'll be using tippets in that 1-8lb test range with an emphasis in the 2.5-5 lb range.

    Note the point above on your fly line strength. Fly lines in the 0 to around 4 weight size will have a core strength of between 12 and 15 lbs, move on up to the 4-7 weight lines and you'll find it rated around 20 lbs and finally go up to the 8-12 wt lines and you'll find 28 lb test or so for the fly line core. If you value your fly line when handling a big fish or attempting to unsnag a fly, keep your tippet strength below the line's core strength and your backing above it. The tippet, by the way, is also know as the class tippet by many who at times fish for world records. When doing this it must be a minimum of 24 inches long I believe to conform to the rules of the International Game Fish Association, or IGFA.

    The tapered leader is designed to cause and enable the fly to change directions and turn over without the fly falling in a muddle of tippet or turning over too fast and hard and thereby making a splash. In general, I use a commercially tapered leader with the tippet that is built in when ever fishing a weedy area for Bass for instance, as less knots equate to less snagged weeds and hangups. Other than that I use a combo of commercially tapered leaders with new tippet added as needed and hand made leaders and tippet interchangably. The midsection and butt of a commercially tapered leader will often last me a season while going through a spool or two of replacement tippet.

    For the smaller diameters tippet, I use the improved, or Stu Apte Blood knot or for it's knot strength over a regular blood knot. Another strong connection for the finer tippets of 5x and smaller is the Surgeons Knot but with three times through instead of the customary two. For larger tippets the regular blood knot does just fine.

    To save time and your fly line tip, tie in about 20 inches of mono that's equal to or slightly heavier than your leader butt sections. I then tie a very small loop using the Perfection Loop knot in that and another in the leader's butt enabling a loop to loop fast change connection. Tying the 20 inch section to the fly line I prefer to use a needle method to bury the mono inside the fly line tip. When fishing weedy areas I roughen the tip of the mono and then pull it into the tip of the fly line with a dab of super glue, using no other knots. On the remainder of my fly lines I use the needle method coupled with the knot. (needle knot) Once you finish the tip tie, you'll have about a 12 inch section of permentant butt with that Perfection Loop in it's end. It's a good thing to coat the Needle Knot with Knot Sense or other coating glue to protect and smooth it out once tied. That also applies to your other leader knots.
    http://www.theflyfishingforum.com/forums/image.php?type=sigpic&userid=24405&dateline=129884  8088
    Great Fishing
    Der Alt Jaeger
    Chuck S

    "I've traveled many roads and some weren't paved."
    Will Rodgers

    http://fishing-folks.blogspot.com/

  6. #6
    Join Date
    Aug 2010
    Location
    Ben Lomond, Ca
    Posts
    2,252
    Blog Entries
    6

    Default Re: Tapered leader or Tippet material

    Bigdon...you've gotten good info and Poke em got right to the heart of it.

    For instance...Nymphing pretty deep for steelhead I'll run straight 8.5 lb fluoro to my top fly.

    But...For trout, if I want tippet size like 4 lb or less, I'll use the appropriate tapered leader to turn over the flies and attach tippet.

    These are just the numbers I think about...and they reflect how I use what Poke em said...-Mike

  7. #7
    Join Date
    Sep 2008
    Location
    Helena, MT
    Posts
    166

    Default Re: Tapered leader or Tippet material

    Ditto what they said.

Similar Threads

  1. SA reconnect tapered leader?
    By two_nymph_rig in forum General Discussion
    Replies: 4
    Last Post: 03-22-2010, 10:14 PM
  2. Tapered leader
    By corefly in forum General Fly Tying Discussions
    Replies: 5
    Last Post: 07-03-2009, 12:57 AM
  3. tapered leader became a knotted leader...
    By yuengling910 in forum General Discussion
    Replies: 15
    Last Post: 01-03-2009, 10:33 PM
  4. Why is leader tapered?
    By jbu311 in forum General Discussion
    Replies: 5
    Last Post: 05-15-2008, 07:03 AM
  5. Tippet vs. Tapered Leader
    By wolfcry in forum General Discussion
    Replies: 5
    Last Post: 03-14-2008, 06:23 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •