Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 3 of 3

Thread: Feeling a bit discombobulated....

  1. #1

    Question Feeling a bit discombobulated....

    Seriously... what is the true and real difference between mechanically sharpened hooks and chemically sharpened hooks?

  2. Default Re: Feeling a bit discombobulated....

    The way that I understand it, the first stage of of both mechanically and chemically sharpened hooks is made with a normal needle grinding method. The wire then goes through all the other stages to make it into a finished hook and it is then heat-treated.

    On chemically sharpened hooks, the hooks go through an additional process in which a chemical is used to attack the surface. The thinner parts of the wire are affected and, in particular, the point. The chemical smoothes or "eats away" the metal leaving a sharper, more polished point.

    I normally tie 99% of my flies with mechanically sharpened hooks mainly because of the cost of mechanically sharpened vs. chemically sharpened. I do like the chemically sharpened hooks though.

  3. #3

    Default Re: Feeling a bit discombobulated....

    Judgrbbjr's thoughts are pretty much my own. I'd add that this has come up more than once in my reading on flyfishing and it is often said that a quality chemically sharpened hook will outperform one that is mechanically sharpened. I can't prove it myself, but it's worth noting.

    I do think the most important method of sharpening your hook is the one you do with that sharpener that should be hanging from your vest. Testing the hook's sharpness and resharpening is far more important--and something that's severely neglected.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •