Thanks Thanks:  0
Likes Likes:  1
Dislikes Dislikes:  0
Page 1 of 2 12 LastLast
Results 1 to 10 of 13
  1. Default Tippet material longevity?

    A fly-fishing author, and shop owner, wrote that he replaces his tippet material every year because he doesn't want to lose a good fish due to tippet failure. I've gone to fluorocarbon, so this would be really expensive. I have separate "vests" for trout and smallmouth, further increasing the cost.

    My tippet doesn't get sunlight except when I'm fishing. Tippet failure is rare, probably a reflection on the size fish I catch, and usually involves something like a sharp rock.

    How long to you keep your tippet material: one, two, three years? Three years seem reasonable to me.

    Also, how do you convert lbs., e.g., 20 lb. mono, to x's, e.g., 1x tippet?

  2. #2

    Default Re: Tippet material longevity?

    This article should provide some information:

    Fluorocarbon vs. Nylon | Fly Fish America

    ...and this will give a rough estimate on lb. test to X size:

    The X rating system for leaders and tippets by Bill Byrd.


    PT/TB
    Daughter to Father, " How many arms do you have, how many fly rods do you need?"

    http://planettrout.wordpress.com/

  3. #3

    Default Re: Tippet material longevity?

    Fluorocarbon lasts forever.

    Nylon mono is weakened by light (UV), heat, and ozone. So store nylon mono like a mushroom - keep it in zip lock bags in a cool dark place.
    Regards,

    Silver



    "Discovery consists of seeing what everybody has seen and thinking what nobody has thought"..........Szent-Gyorgy

  4. Likes Ard liked this post
  5. #4
    Join Date
    Oct 2007
    Location
    Wasilla / Skwentna, Alaska
    Posts
    15,389
    Blog Entries
    111

    Default Re: Tippet material longevity?

    Mr. Silver has that right,

    I have never figured out the lanyard thing that people wear with 4 or 5 spools of tippet hanging out in the elements. I keep it shielded and it seems to last until I empty the spools

    Anywhere can be the land of great expectations, broken dreams, or paradise found, it's all up to you.

    Life On The Line - Alaska Fishing with Ard
    Ard's Forum blog, Alaska Outdoors

  6. Default Re: Tippet material longevity?

    The Bill Battles article was really interesting. Thanks.

  7. #6

    Default Re: Tippet material longevity?

    Quote Originally Posted by silver creek View Post
    Fluorocarbon lasts forever.

    Nylon mono is weakened by light (UV), heat, and ozone. So store nylon mono like a mushroom - keep it in zip lock bags in a cool dark place.
    and away from electric motors which create ozone.

  8. #7
    Join Date
    Jun 2008
    Location
    Lake of the Woods/Rainy River Minnesota Canada border
    Posts
    4,752

    Default Re: Tippet material longevity?

    I've got stuff that is older than some kids. I just keep it in the dark and it will last longer than I do. As for fluorocarbon, I hate to use the stuff because it does not break down in nature. I would certainly never make a whole leader out of it.

  9. #8

    Default Re: Tippet material longevity?

    I think another consideration is what size and how fast the angler uses tippet up. If the angler rarely uses any think thicker than 4X, then why replace the the leader material that is 3X and thicker every year? The weakest part of the leader is the tippet; and even if you use 3X that is several years old to rebuild a leader, it will not be as weak as the fresh 4X and 5X that you are tying to it.

    I never will understand telling newbies to always buy new tippet material every year. There is a lot of good 3X and 2X stuff being thrown away.

    As an example, I use 4X and 5X tippet for 99% of my fishing. Rio Powerflex leader/tippet material in 5x is 5 lb test, 4x is 6.4 lb test, 3x is 8.2 lb test, and 2x is 10 lb test. It will take several years to weaken a 3x 8.2 lb test leader material to the 5.0 lb of the 5x material it is likely tied to. In the 30 plus years I have been fishing, I can't remember when a fish broke the older section of leader material below the tippet. The tippet always breaks.

    Most of the time I use tippet fast enough that I do not purposely buy new tippet every year. Consider that the spool I was using at the end of the season was bought late in the season. Why should I throw it away for "new" tippet that may be at best 6 months "fresher".

    I will use the same spool of nylon tippet I was using at the end of the last season; and during this season, it will run out and I will buy a fresh spool. Consider that I am still buying at least a new spool every year. Who cares if the swap is in during the season or at the beginning of the season? As long as you use at least one spool of the tippet material that you commonly use every year it makes no difference when that changeover is made.
    Regards,

    Silver



    "Discovery consists of seeing what everybody has seen and thinking what nobody has thought"..........Szent-Gyorgy

  10. #9
    Join Date
    Jul 2011
    Location
    Holliston, MA, USA
    Posts
    607

    Default Re: Tippet material longevity?

    If you are using flourocarbon, then you have no worries,

    If you are using mono, then get rid of it when it stops working well.

    That's my best advice. For those that test their knots, this won't sound so new.

    For others, start testing your knots!
    Cheers,
    --Rob

  11. #10

    Default Re: Tippet material longevity?

    While it is true that nylon monofilament breaks down faster than fluorocarbon, faster is a relative term in this case. Nylon mono takes 500 - 600 years of full environmental exposure to break down so lets not toss mono because we believe it "breaks down". It is faster that only because fluorocarbon takes about 4000 years.

    If Christ's apostles had fluorocarbon fishing nets, they would still be on the bottom of the Sea of Gallilee.
    Regards,

    Silver



    "Discovery consists of seeing what everybody has seen and thinking what nobody has thought"..........Szent-Gyorgy

Page 1 of 2 12 LastLast

Similar Threads

  1. Tapered leader or Tippet material
    By bigdon90 in forum General Discussion
    Replies: 6
    Last Post: 04-19-2011, 12:29 AM
  2. leaders and tippet material
    By smog7 in forum General Discussion
    Replies: 9
    Last Post: 11-17-2009, 11:23 AM
  3. Tippet material
    By axle27 in forum General Discussion
    Replies: 1
    Last Post: 06-08-2009, 07:38 PM
  4. Leaders and Tippet Material
    By axle27 in forum General Discussion
    Replies: 11
    Last Post: 08-07-2008, 04:54 PM
  5. Question - tippet material
    By cimages11 in forum Saltwater Fly Fishing
    Replies: 7
    Last Post: 02-17-2008, 06:42 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •