Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 6 of 6
  1. #1
    Join Date
    Jun 2011
    Location
    Winter Haven, Florida
    Posts
    63

    Default Patterns for a new Central Florida fly tier

    Good morning.

    I'm in the midst of getting an old 8' #6 WonderRod back in shape, and I have an old Thompson vice on the way and was wondering what would be some good patterns for me to begin with. I'm in Central Florida and my primary fish of choice to begin with will be fresh water - bluegills and bass.

    Thank you.

    Rick
    Last edited by rvc; 07-05-2011 at 09:18 AM.

  2. #2
    Join Date
    Apr 2008
    Location
    Monroe, Michigan
    Posts
    2,584

    Default Re: Patterns for a new Central Florida fly tier

    For the gills, foam spiders; easy to tye and fish. For the Bass, foam poppers.

    Dan

  3. #3
    Join Date
    Oct 2010
    Location
    Bennington, VT
    Posts
    1,546

    Default Re: Patterns for a new Central Florida fly tier

    and woolly buggers. Super easy to tie.
    Gary

  4. #4
    Join Date
    Jun 2008
    Posts
    4,019

    Default Re: Patterns for a new Central Florida fly tier

    For foam spiders, you can get small foam sheets or pre stamped spider bodies in a fly shop which can be convenient if you have one near by, or for a less money a pack of 30 sheets of 8 1/2 x11" 2mm craft foam in assorted colors for $6 or so from a craft store like Michaels which will give you 2 lifetimes supply of spiders.

    I use a razor blade and a straight edge ruler to cut strips for the bodies. I cut them one hook gap wide, using the point of a hook to make little pinpricks to line up the ruler. Once a long strip is cut to the proper width, you can cut the individual strips to length at about 1 /2 to 2x the shank length of the hook. For panfish any type of hook -- standard length dry fly or even heavy wire 2 extra long or 3 extra long nymph hook is fine (the foam will float heavy wire hooks with no problem). A size 10 or 12 is about right-- any smaller and you'll get a lot of fish swallowing them.

    Here's a video: [ame=http://www.youtube.com/watch?v=y5JueSrnEj4]YouTube - ‪Tying the Foam Spider‬‏[/ame]

    For an underbody, the tyer in the vid uses a synthetic chenille, but you can use anything dubbing, yarn, twisted peacock herl or just thread.

    For bass you can also use the same foam to make gurglers, cutting the foam into wider strips, by using the hook gap width on the larger size 6 hooks. Here's a step by step: Tying the Gurgler
    You can use a synthetic like cactus chenille instead of winding hackle for the underbody.

    For bass, in addition to the woolly bugger, you can use the same hooks and marabou for a simple marabou winged streamer. A simple to use body material is a woven mylar tinsel sold under many names like Diamond Braid, Body Braid etc (about $2.50 for 4 yards), and is available in many metallic colors. Unlike the weighted bugger which will sink on retrieve and is better for fishing deeper, the marabou streamer will suspend in the water column and can be stripped back slowly near the surface. Good color combinations are:
    Gold or Silver body, Black marabou wing
    Gold body Olive marabou wing
    Gold body, Yellow marabou wing
    Silver body, White marabou wing

    If you want to get fancy, you can add a couple strands of pearl colored Krystal Flash to the wing for a little added bling (about $3.50 a pack), and a topping of a few strands of Peacock Herl (1/4 oz of strung herl about $3).

    Here's a vid for a simple marabou streamer: [ame=http://www.youtube.com/watch?v=ny6CC72m2Es]YouTube - ‪Yellow Marabou Streamer.mpg‬‏[/ame]

    You can also make your own poppers. Probably the simplest way to get started is buying one of these "kits"- popper bodies complete with hooks:
    JS Fly Fishing: Rod Building, Fly Tying: Wapsi Foam Popper Bodies with Hooks

    To these you can add tailing material, rubber legs etc. Before you tie stuff on to them, you can paint the bodies with acrylic paints, although they should work fine unpainted. After you've cranked out a few, you may eventually want to make your own by shaping corks you can buy in bulk with a Dremel tool.

    Here's a step by step-- this one's pretty fancy, you don't have to get this elaborate to catch fish, just an unpainted popper body, a bit of marabou fluff for a tail and maybe a couple of strands of rubber legs should work fine: http://www.warmwaterflytyer.com/docu...water-Bite.pdf

    Good luck and keep us posted on your tying!
    Mark

  5. #5
    Join Date
    Jun 2011
    Location
    Winter Haven, Florida
    Posts
    63

    Default Re: Patterns for a new Central Florida fly tier

    Thanks very much for all this info, guys, especially the videos and links. It is very helpful and very much appreciated.

    RVC

  6. #6
    Join Date
    Apr 2008
    Location
    Monroe, Michigan
    Posts
    2,584

    Default Re: Patterns for a new Central Florida fly tier

    Mark,
    Nice post with the video links...On my foam spiders I've been using UV Ice Dub for the body; it gives a little spark of life...
    Dan

    ---------- Post added at 02:11 PM ---------- Previous post was at 02:10 PM ----------

    Mark,
    Nice post with the video links...On my foam spiders I've been using UV Ice Dub for the body; it gives a little spark of life...

    For hooks I use the Eagle Claw Carlisle hooks, they have a longer shank then most "fly" hooks, and they're cheap.
    Dan

Similar Threads

  1. Replies: 5
    Last Post: 06-03-2011, 02:12 AM
  2. Central Florida Saltwater Flats Report
    By Capt Chris M in forum Southeast U.S.
    Replies: 0
    Last Post: 04-02-2011, 12:36 PM
  3. Central Florida Flats Fishing Report 5/27/10
    By Capt Chris M in forum Southeast U.S.
    Replies: 0
    Last Post: 05-27-2010, 01:05 PM
  4. Need a fly tier
    By bmadd in forum Fly Fishing Tackle Member Classifieds
    Replies: 2
    Last Post: 05-04-2010, 03:20 PM
  5. Hello from Central Florida
    By RookieBob in forum Member Introductions
    Replies: 5
    Last Post: 04-25-2010, 04:20 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •