Thanks Thanks:  0
Likes Likes:  1
Dislikes Dislikes:  0
Page 1 of 2 12 LastLast
Results 1 to 10 of 18
  1. #1

    Default Chainsaws for carp.

    Well sharpened up the chainsaw for tomorrow mornings fishing adventure to my usual river. I went to check the river levels in person this morning but before I could get to the river this tree just happened to fall asleep in the road. I decided to give it 24hrs before I fixed it for the park. It took them 3 weeks to get rid of the last one, the least I can do is help right? The river was still high anyways with huge gusts of wind.


    If there is anything I enjoy more than fishing its pretending to be a lumberjack. Hopefully Ill have enough fingers left over to strip in some line after.

  2. #2

    Default Re: Chainsaws for carp.

    Yeah, its always fun when we have to take matters into our own hands. Don't they know we have work to do?

  3. #3

    Default Re: Chainsaws for carp.

    Indeed it was fun cutting up the tree this morning. When I arrived at the park the entrance gate was open and the tree untouched. I wouldn't be surprised if the city even knew about it. But I wasn't gonna call and miss out on the fun. After I started making the first cut on the trunk, sure enough one of the few times I've seen forest preserve police pull in behind my car. I quickly finished the cut so even if I had to stop I would be able to push it off the road after he left. It ended up being jut fine with the officer. It was actually a police officer I had seen twice last year and he knew me to be kinda crazy then too. I made a few more cuts, then the officer and I cleared the road. I finally made it to the river after being called nuts by the officer.

    I was able to fish for 2hrs after the tree down dilema. I forgot my camera as usual, but most of the fish were small. I caught a total of 8 fish: 4 bluegills, 3 crappie and 1 baby smally. The carp eluded me again. It just makes me more addicted. I can't wait for the river to recede back to normal levels and I can get back in her quick. As usual good luck out there.

  4. #4
    Join Date
    Jan 2012
    Location
    Pocono Lake , Pennsylvania
    Posts
    3,173

    Default Re: Chainsaws for carp.

    Last guy to use a chainsaw to improve his fishing won &100,000 on the FLW tour by cutting his way into to back arms of the lake he was competing in! Could be an omen of big carp to come!
    "I was born to fish" Lee Wulff
    "There's more B.S. in fly fishing then there is in a Kansas feedlot." Lefty Kreh
    " It ain't over till it's over." Yogi Berra
    "Your not old,you've simply acquired a patina." Swirlchaser

  5. Likes pkins44 liked this post
  6. #5

    Default Re: Chainsaws for carp.

    Was the water pretty muddy? What were you throwing (if you dont mind me asking)?

    ---------- Post added at 08:22 AM ---------- Previous post was at 08:21 AM ----------

    That's great that it worked out alright. Sometimes you just never know how the authorities are going to react.
    If it were me, I would have done all that work only to be skunked.

  7. #6

    Default Re: Chainsaws for carp.

    The water was just starting to clear a little but still very muddy. Although thge water was muddy, it was an extremely bright day and I opted to try my luck with a white zonker. I can't seem to get away from that pattern. Since the river was so high and muddy I focused most of my fishing at the mouth of a small creek that flowed much slower. Most of the fish I caught would probably considered bait fish but thats fine by me.

  8. #7

    Default Re: Chainsaws for carp.

    I hear ya, this time of year when they still seem to be holding deep, I'm happy to be catching anything that wants to bite.
    Ive been having some luck with a gray and black WB, but that's just catching smaller panfish. The general visibility in the water here is about a foot to two feet, so I may have to be brave and try the white colors and see how that does.
    Yesterday I was doing great with the crappies on spin gear with a green grub with green flakes on a beetle spin, so last night I tied on a damsel pattern in green with red mono eyes to see if I can get the profile to translate.
    I'm not sure if that's a wild goose chase or a new found technique. LOL

  9. #8

    Default Re: Chainsaws for carp.

    I have been doing alot of experimenting with different colors and flys with the ever changing weather and water clarity. Once I get some of the data compiled I might have a little better idea on what to throw at these fish rather than bright fly on a bright day lol.

    On a seperate note, is there anyone aware of fly fishing tournaments in the great lakes region or has anyone ever set one up? Just trying to get a few fly fisherman together for a friendly competion but wouldnt know how to organize it properly.[COLOR="Silv

  10. #9

    Default Re: Chainsaws for carp.

    I design and build mountain bike trails at the same park I fish at, so this is a regular thing for me. all volenteer, either we do it and have trails to play on or not so my crew does a fair amount of the clearing atleast in the backwoods areas.

  11. #10

    Default Re: Chainsaws for carp.

    On a seperate note, is there anyone aware of fly fishing tournaments in the great lakes region or has anyone ever set one up? Just trying to get a few fly fisherman together for a friendly competion but wouldnt know how to organize it properly.[COLOR="Silv[/QUOTE]

    I'm not in the area, so I'm no help, but I would make a separate thread for that so you can get more people involved. Sounds like a good idea to me!

Page 1 of 2 12 LastLast

Similar Threads

  1. Replies: 0
    Last Post: 03-24-2012, 04:21 PM
  2. First Carp on a fly!
    By rrarods in forum Rocky Mountain Range
    Replies: 2
    Last Post: 06-02-2011, 10:47 AM
  3. Carp
    By lonnie1952 in forum Pacific Southwest
    Replies: 1
    Last Post: 04-06-2011, 06:16 PM
  4. Carp Flies for Mass Carp?
    By Wado13Mexico in forum Warmwater Fly Fishing
    Replies: 4
    Last Post: 07-30-2009, 03:05 PM
  5. carp?
    By fin??whatfin?? in forum Pacific Northwest
    Replies: 4
    Last Post: 05-11-2008, 09:11 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •