Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 4 of 4

Thread: AFFTA and Fly Fishing Show Join Forces

  1. #1

    Default AFFTA and Fly Fishing Show Join Forces

    New article posted on theflyfishingforum.com: AFFTA and Fly Fishing Show Join Forces

  2. #2
    Join Date
    Mar 2009
    Location
    south florida
    Posts
    2,150

    Default Re: AFFTA and Fly Fishing Show Join Forces

    All you guys that are near a show and attend, please go to the AFTMA booth and let those guys know single-handed fly fishermen are NOT 2nd class patrons.

    >WE WANT TOTAL HEAD WEIGHTS IN GRAINS< and wt/ft of running line.

    Just like the 2-handed guys have been getting for 50 years now.

    Thanks for your cooperation.
    http://www.miterclamp.com/Images/N_Amer_FF.jpg Cheers, Jim

  3. #3
    Join Date
    Nov 2009
    Location
    White City (tad north of Medford) Oar-E-Gone
    Posts
    10,685

    Default Re: AFFTA and Fly Fishing Show Join Forces

    Jim, subject to correction here, but I thought all single hander lines had very tight weight tolerances. There appears to be some fiddling with that at the moment as I've seen references to '5.5' weight lines. That said, you make a valid point as its only the first 30 feet that get 'counted.'

    As you note line design for 2handers can get very inventive just by going to a thicker/thinner head material. Same weight (in grains) could easily change in just 10 foot of line.

    Minor edit. Took a bit of looking but DT single hander lines can change quickly. Gather as little as six feet can 'up one' the casting line weight.
    When wealth is lost, nothing is lost; when health is lost, something is lost; when character is lost, all is lost. - Billy Graham"

  4. #4
    Join Date
    Mar 2009
    Location
    south florida
    Posts
    2,150

    Default Re: AFFTA and Fly Fishing Show Join Forces

    Jim, subject to correction here, but I thought all single hander lines had very tight weight tolerances.
    They do, Fred, for the first 30 feet. But WF fishing lines in the 7,8,9 wt range can have head lengths of around 50 feet - some longer. The SA MED that I fish with on calm days has a head length of over 70 feet. Some of the SA steelhead lines have very long heads as well.

    The Cortland tropical Liquid Crystal, for instance, has a head length of 47' from 6wt through 9 wt (inclusive). The 8 wt head weighs 305 gns. Even the compact heads in that series are 42' from 10-12 wts inclusive. But the billfish heads are 30 feet.

    From actual measurements on vastly different configuration heads, I generally overhang half the head length (except for the MED ). So that is 70 feet of line with the Crystal.

    This is the reason why the CCS database is only good as a reference (for the salt) if you have weighed the actual amount of line out the tip on a long cast. As I said in another post, I like rods (for the salt) that test out by CCS at 2 1/2 to 3 times higher in their ERN column than the line I plan to use on it. But again, that's just me.

    There is a discussion about under/over-lining that I just saw that goes hand in hand with this topic. For me, a rod "absoluely requires" underlining if, when going for a long cast within my casting range, the rod starts "mushing out" on the presentation. For the salt, I want a rod more powerful than me during my best cast- but not by much.

    That is why I bring the line I want to fish with me when test casting a new rod. In my opinion, people do it backwards. They go by rod "weight rating" and wind up using a line one or two sizes heavier.

    To me that makes little sense. Got to get to the Post Office before it closes. Cheers,
    http://www.miterclamp.com/Images/N_Amer_FF.jpg Cheers, Jim

Similar Threads

  1. Fishing Tradeshows Join Forces
    By Editor in forum News & articles for discussion
    Replies: 0
    Last Post: 09-17-2012, 03:56 AM
  2. Replies: 0
    Last Post: 11-29-2011, 06:00 PM
  3. I'll show you mine if you show me yours (fly boxes)
    By wovenstonefly in forum Flies and Fly Tying for Spey Fishing
    Replies: 3
    Last Post: 02-04-2011, 03:37 PM
  4. Murphy runs for AFFTA
    By Editor in forum News & articles for discussion
    Replies: 1
    Last Post: 08-15-2010, 04:30 PM
  5. AFFTA announces new show and new Marketing Director
    By Editor in forum News & articles for discussion
    Replies: 0
    Last Post: 12-21-2009, 06:44 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •