Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 8 of 8

Thread: Question - tippet material

  1. Question Question - tippet material

    I am planning a trip to the Florida Keys this comming May. I will be using a 9wt., rod with a Feather Craft furled leader. Was planning on using a florocarbon tippet. My question is, can any florocarbon line be used as a tippet, such as Berkley Vanish or any other line. What is the difference between that and a tippet material from say Orvis or any other fly fishing terminal tackle manufacture.
    Fred

  2. #2

    Default Re: Question - tippet material

    Cabelas sells floro tippet and leaders. You may want to look into them.
    <*))))>< Fish with teeth ... If I ty it a fish will hit it

  3. Default Re: Question - tippet material

    Quote Originally Posted by cimages11 View Post
    I am planning a trip to the Florida Keys this comming May. I will be using a 9wt., rod with a Feather Craft furled leader. Was planning on using a florocarbon tippet. My question is, can any florocarbon line be used as a tippet, such as Berkley Vanish or any other line. What is the difference between that and a tippet material from say Orvis or any other fly fishing terminal tackle manufacture.
    Fred:
    Depends on what and where you are fishing...conventional wisdom as told to me my my guides in keys..is ....fluro if you want a faster sink for deeper flats ...however, the reason for hard mono leader and tippet material is better turnover of larger flies in the wind....
    IMO if 12, 16 or 20 Vanish is as stiff as RIO et al fluro...would not make any difference. I use a RIO saltwater leader then add tippet in my 8, 9, or 10 wts when changing flies reduces the length...use the stiffest and heaviest tippet that will catch fish...assuming no records...cause you have got to get the fly to the fish and soft and light material which won't turnover or gets blown back or left or right won't get it there...now if you are going with a guide... they have their way and it's best to let them rig it their way with their fly...I use RIO taper leaders and RIO hard saltwater and Gamma Frog Hair or Deep Blue. I always check the material's diameter...and I'll use the heaviest of relatively equal diameter e.g. RIO Hard Saltwater in 8 kg.IGFA is .19 in and it's alot stiffer than fluro so instead of 8 kg fluro at .13 in I'll use 10 kg Gamma Frog hair at .15 in but in most situations with heavier flies in the keys I'll use the RIO Hard at 8 or 6 kg...and loop knot the fly.

  4. Default Re: Question - tippet material

    Thank you both for the infomation. I guess I will try several different materials and just see what works best for me.
    Fred

  5. #5
    Join Date
    Jan 2007
    Location
    Central Florida
    Posts
    5,392

    Default Re: Question - tippet material

    Hi, take a look at this thread if you have not seen. it.

    Frank

  6. Default Re: Question - tippet material

    If you are using a FURLED leader, I would "PERSONALLY" use a regular FLUORO line in 8lb, 10lb, etc. what ever pound you think you will need.
    I am sorry but I don't see a noticeable sinking on Fluoro, but maybe that is just me.
    TIPPET is going to be a smaller diameter than regular fishing fluorocarbon, and a lot more expensive. Where you will be using the big stuff anyway I would save a few dollars and buy the regular line like VANISH, SEAGAR, P-LINE, etc, but be sure it is 100% fluorocarbon and not coated as the coated turns white.
    Just pull of however many feet you want and put a Perfection loop in it and attach to the furl.

    Also, remember that Fluorocarbon does not disintegrate so pick up all pieces and dispose of it.

  7. Default Re: Question - tippet material

    Thank you Joni & Frank. That is what I was looking for.
    Fred

  8. Default Re: Question - tippet material

    Quote Originally Posted by cimages11 View Post
    I am planning a trip to the Florida Keys this comming May. I will be using a 9wt., rod with a Feather Craft furled leader. Was planning on using a florocarbon tippet. My question is, can any florocarbon line be used as a tippet, such as Berkley Vanish or any other line. What is the difference between that and a tippet material from say Orvis or any other fly fishing terminal tackle manufacture.
    Cimages11,

    you can use fluoro but for most of the fishing you will be doing down in the keys use a leader specificaly designed for the fish you will be fishing for. I use the Rio saltwater leaders, they offer leaders for snook, redfish, bonefish, permit, and tarpon. Rio also offers these leaders with shock tippets in the 20-25 lb class for smaller flats species and 80+ for the ir tarpon leaders. you might want to look into getting a few different "styles" for your trip. I would suggest 2 bonefish or permit and 2 redfish or snook leaders. if you are looking to get into some tarpon action your 9wt will do ok for juvies (20-30lbs), i would suggest using the snook leader and replacing the shock tippet with 40lb tippet material. If you are going for bones, use the bonefish leader and replace the shock tippet with 15-20lb fluoro as it does sink slightly faster and is more abrasion resistant if you are fishing areas that have alot of rocks. If you are fishing grassflats then you wont need to do anything but tie on the fly and cast.

    Hope this helps
    Let us all share our wisdom with a younger generation. Tight Loops, Tight Lines and Good Fishing to All

Similar Threads

  1. Calling all gardeners....
    By fyshstykr in forum The Lodge Den
    Replies: 23
    Last Post: 05-11-2008, 11:12 PM
  2. Hi from CA, soon to be WA
    By yellowstone in forum Member Introductions
    Replies: 2
    Last Post: 11-08-2007, 02:47 PM
  3. Fly-Fishing History Blog
    By randyflycaster in forum General Discussion
    Replies: 0
    Last Post: 11-08-2007, 09:39 AM
  4. Flyfishing Book
    By FowlHabit in forum General Discussion
    Replies: 4
    Last Post: 08-18-2006, 11:02 PM
  5. Q about backing
    By tenetxnosce in forum General Discussion
    Replies: 10
    Last Post: 06-16-2006, 03:00 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •