Thanks Thanks:  0
Likes Likes:  3
Results 1 to 7 of 7
  1. #1
    cariboo87 Guest

    Default Poor mans tube fly

    Here is is how I was first shown how to tie a tube fly, Im digging up some sbs's and such to post for everyone

    I was shown this fly a long long time ago by a doctor I used to fish with. Even though he had the money to buy anything he wanted he still felt that if you could save a few bucks, and get the same quality then why not right? So thats where I got this from, I have used it for trout, salmon, steelhead, you can tie anything on a tube, I tie muddler minnows on the tube all the time and they work great! You can put coneheads on tubes, beads, pretty much anything you would put on a normal hook.

    So here you go.
    and ps. yes I know the plastic can crack in the winter but it sure beats loosing expensive brass or copper tubes if you cant afford them all the time.

    Step 1- Take a razor blade or scissors and cut a 1/2" chunk of q-tip off

    Step 2- You want to make a small lip on the end of one side of your tube. Take the chunk of tube you just cut and use a lighter and slowly roll the tube between your fingers while holding it close enough to the flame that it melts the tip just enough to make the lip you want. You roll it between your fingers so it makes the lip even.

    Step 3- Put the needle in your vice like you would a hook, I cut the tip of the needle so it does not poke me and so you do not have a long piece sticking out while tying the fly

    Step 4- Slide the tube on and make sure you slide it far enough back so it does not spin while tying the fly

    Step 5- Start right behind the lip and wrap your thread back a little bit.

    Step 6- Pick out a piece of black and a piece of purple marabou and strip the first few fibers off the bottom of the feather. You will be palmering these forward so make sure the feathers you pick have long flowing fibers

    Step 7- Tie in your marabou at the tip you stripped

    Step 8- Palmer your black marabou forward and tie off

    Step 9- Tie in 4 pieces of pearl crystal flash on each side of the fly

    Step 10- Tie in your purple marabou at the tip as you will be palmering it forward like you did with the black marabou

    Step 11- Palmer your purple marabou forward and tie off

    Step 12- Whip finish

    Step 13- Apply a drop of head cement

    Step 14- It a personal choice weather you like to do this or not but I take a piece of surgical tubing and super glue it onto the tube. You can then slide the eye of your hook into the tubing and it will hold it there.What this does is it prevents the fly from sliding away from the hook while fishing it.

  2. Likes trout sniper, Guest1, silvertip8k liked this post
  3. #2
    Join Date
    Jun 2008
    Lake of the Woods/Rainy River Minnesota Canada border

    Default Re: Poor mans tube fly

    I've been tying tube flies on those for a long time. They come in a lot of colors also. I have blue, purple, pink, mint green and white just off the top of my head. By the way don't anyone run out and buy a bunch of these, I got the big boxes of them and have about a 12 lifetime supply. I'd be happy to share. Here's another cool tube fly I did on those;
    Ear plug poppers.

    By the way, if you know someone that uses oxygen, the tube for the oxygen tanks fit these tube perfect. Ask them to save their old ones for you.

  4. #3
    cariboo87 Guest

    Default Re: Poor mans tube fly

    The guy who first showed me this fly stored his in straws, nice and compact

  5. #4
    Join Date
    Jan 2012
    Pocono Lake , Pennsylvania

    Default Re: Poor mans tube fly

    That's a real cool way to make them ! Ive been using WAWA coffee stirrers and they work well also. Great ear plug tubes Dan ! I was putting the plugs on the hook I like that better! That's another item that comes in a bunch of cool color combos.
    "I was born to fish" Lee Wulff
    "There's more B.S. in fly fishing then there is in a Kansas feedlot." Lefty Kreh
    " It ain't over till it's over." Yogi Berra
    "Your not old,you've simply acquired a patina." Swirlchaser

  6. #5
    Join Date
    Aug 2010
    On a trout stream/Suburban Pittsburgh
    Blog Entries

    Default Re: Poor mans tube fly

    Cool SBS, thanks for putting that together. One other thing to think about for a tube material are those plastic extensions that come in aerosol spray cans--such as for compressed air. They're smaller in diameter but fairly rigid.

    Disclaimer--I have not tried a tube on one yet
    ~*~Leave only your footprints~*~

  7. #6

    Default Re: Poor mans tube fly

    thanks very much for making the tutorial up...I like still shots a lot better than you tubes...the pics give you a point of completing stages...which helps me a lot...I want to try the method you show and integrate it into some larger articulating streamers...

    Charlie Craven in the Denver area also does his tutorials that way for years too...which is a good way to learn a pattern...

    Charlie's FlyBox - Metro Denver, Colorado's Best Fly Fishing Retailer (flyshop) with online Fly Tying Tutorials

    I can imagine a lot of spin offs from that technique...t

    ted...trout bum/wandering monk
    public water 20"er
    public land pope & young

    Breac à linne, slat à coille is fiadh à f́reach - mèirle às nach do ghabh gàidheal riamh nàire.
    a fish from the river, a rod from the woods and a stag from the mountain , thefts ne'er a Gael was ashamed
    ...and old gaelic proverb...

    my blog & website

  8. #7

    Default Re: Poor mans tube fly

    once upon a time in the UK, you could get hold of tubular separators which were designed for spacing wall tiles correctly. They were absolutely perfect for making small tubes... the ear bug technique is a great alternative which i have used a few times myself!

Similar Threads

  1. Poor Boy Rod Holder
    By crittergetter in forum Everything Else
    Replies: 9
    Last Post: 01-07-2014, 10:39 AM
  2. Any 10wt suggestions for a poor caster?
    By tpcollins in forum Coldwater Fly Fishing
    Replies: 20
    Last Post: 12-24-2013, 12:29 PM
  3. Poor Bills Wham Pous Cat
    By FlySlinger in forum Share Patterns
    Replies: 3
    Last Post: 04-09-2010, 12:34 AM
  4. My poor dog......
    By fyshstykr in forum The Lodge Den
    Replies: 4
    Last Post: 01-01-2009, 08:50 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts