Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Page 2 of 2 FirstFirst 12
Results 11 to 16 of 16
  1. Default Re: deceiver patterns

    Okay

    Big Eye Tinker Mackeral

    Hook: Daiichi #2546 3/0
    Thread: Danville 210 white
    Material: EP Fibers; Chartreuse 3D, Olive, Red and White
    Flash: Rootbeer KrystalFlash
    Eyes: Molded 3D size 7
    Stripes: Sharpie

    1. Start your thread on the hook shank above the point, tie in a 1" piece of red fibers (a pinch) so it angles down over the hook point. Trim this even with the point. This red will be the gills

    2. Start on top of the hook in the same spot with a piece of chartreuse, this piece should be about a 1/3" thick. If you first tie this fly and it comes out real bulky, thin out the thickness of the clumps you use off the hank. Don't worry you'll soon get used to pulling the right amount off to use. Tie it in and leave about 5 1/2" hanging off the back end. This will make the overall length of the fly about 6".

    3. If you use a rotary vise, flip it over and tie in an equal length piece of white fibers to the bottom of the hook. Take a bodkin, scissors or whatever and split the fibers so there is equal amounts on either side of the hook. Stroke them back so it somewhat mixes with the char.

    4. Now, take a piece of krystal flash and tie one piece in on the top and bottom.

    5. Take another piece of chartreuse and tie it in front of the other piece, only this time the piece should be about 4" long. Do the same with the white on the bottom side.

    6. Add another piece of krystal flash on the top and bottom.

    7. At this point you should have what looks like a slight taper of material at the back of the hook shank and you should have about half of the shank left.

    8. Take a piece of Olive fibers and lay that on top of the chartreuse. This piece should be about 3 inches long. Continue with white on the bottom of the hook.

    9. Add a piece of krystal flash on the top and bottom.

    10. Continue the shortening of material and stacking process with olive on top and white on bottom until you have about an eye length of shank left. Now you should see a rough taper and fishy shape to the fly. Note the sides of the hook should be showing.

    11. Now take another piece of white that is the entire length of the fly and tie it in on either side to cover up your thread wraps. You can use a slightly different color than white, say polar bear or even a light pink. This will give the fly a distinct lateral line. The possibilities are endless. Whip finish, 2 times for added durability and cast off.

    12. Take the fly out of the vise. Using an ordinary fine tooth comb, comb it all together and then trim it to the shape you want it to be, follow the taper and round out the head. Note, it is easier to trim from front to back. It takes a little getting used to but once you get it you'll see why.

    13. Now, mix up some 5 minute epoxy and put a dab on either side for the eyes. I like using Molded 3D eyes in a size 7, I think it's about 3/8". If you want to make this fly a definate working fly, coat the eyes and the head of the fly with the epoxy. It won't really mess up the overall look of the fly, it will just make it harder for the blues to rip them off. Though, they will still rip them off.

    14. Mark the top of the fly with a black permanent marker to give it the tiger stripes.

    15. I hope this makes sense. Good luck with it and if anybody has questions, feel free to ask. I'm sure that this will insult some of you guys' intelligence but I want to let every one know that these are killer flies! Tight Lines!

  2. Default Re: deceiver patterns

    note step 12.
    I meant to type from back to front. Not front to back. Sorry

  3. Re: deceiver patterns

    I tried my hand at some decievers.. Dont laugh, I have never tied them before:






    Not bad for first timer if I do say so myself.
    [SIGPIC][/SIGPIC]

  4. Default Re: deceiver patterns

    don't know but they look good to me.

  5. #15
    Join Date
    Feb 2005
    Location
    South Texas
    Posts
    4,313

    Default Re: deceiver patterns

    You tie better than you photograph. (Jk, haha)
    http://sphotos.ak.fbcdn.net/hphotos-..._1276302_n.jpg

    I'd rather hunt fish than bait deer any day.

  6. Default Re: deceiver patterns

    These are some sites for Deceiver and Clouser Patterns Plus several Forums with good info on various flies and patterns.
    http://www.onlineflytyer.com/article_fox1.asp
    http://www.flytyingworld.com/Pages
    http://www.flyanglersonline.com/
    http://www.ultimateflytying.com/FlyPatterns.htm
    http://www.warmwaterflyfisher.com/wwflypatterns.htm
    http://www.mwflytying.com/
    http://www.onlineflytyer.com/articles.asp
    http://www.flytyingworld.com/

    http://www.flycraftangling.com/index.html
    http://jackgartside.com/
    http://www.alaskaflyfishingonline.com/
    http://www.dwskok.com/step-by-steps.htm
    http://www.warmfly.com/index.php?option=com_smf&Itemid=26
    http://www.geocities.com/clinscott_pfl/backwaterhawgs.html

    http://www.flyfishinsalt.com/index.jsp
    http://www.flyfisherman.com/
    http://www.troutflies.com/
    http://www.flytyer.com/
    http://www.loup-garou.net/flytying.html
    http://www.flyfishohio.com/

    http://thebasspond.yuku.com/
    http://fishandflymagazine.com/index.asp
    http://www.theflyfishingforum.com/forums/archive/f-15.html
    http://www.totalflyfishing.com/index.php/fly-fishing-destinations/oklahoma

    http://flybass.com/
    http://www.boatowners.com/fish_fly.htm
    http://stevenojai.tripod.com/nymph.htm
    http://www.hatchesmagazine.com/patterns/
    http://ozarkanglers.com/forums/index.php?act=idx
    http://www.invictaflies.us/Articles/mini_streamers.htm
    http://www.troutnut.com/

    http://www.westfly.com/home/home2.htm
    http://www.hookedonflies.com/
    http://groups.msn.com/BluegillFliesNotebook
    http://www.jerryhadden.com/flyfree/flyfree.html
    http://www.flyfishusa.com/index.htm
    http://www.flyline.com/fly_patterns/

    http://www.youtube.com/NEWFLIES
    http://www.flyfishingforum.com/flytalk4/forumdisplay.php?f=33

    Hope this helps…
    In His Love,
    Clyde

Page 2 of 2 FirstFirst 12

Similar Threads

  1. Newb to Fly Fishing
    By Emp912 in forum Member Introductions
    Replies: 0
    Last Post: 04-20-2006, 01:54 PM
  2. New Corporate Member
    By Fly Gear Deals in forum The Lodge Den
    Replies: 1
    Last Post: 03-04-2006, 08:45 PM
  3. 2006 Fly Fishing Show
    By Piscator in forum General Discussion
    Replies: 10
    Last Post: 01-25-2006, 01:50 AM
  4. Arkansas River Report 6/17/05 - Salida, Colorado
    By Fish Bones in forum Rocky Mountain Range
    Replies: 1
    Last Post: 06-21-2005, 07:58 AM
  5. Hi, I am new!
    By allen in forum Member Introductions
    Replies: 4
    Last Post: 05-03-2005, 10:33 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •