Thanks Thanks:  0
Likes Likes:  4
Page 1 of 2 12 LastLast
Results 1 to 10 of 14
  1. #1
    Join Date
    Oct 2013
    Location
    new york city
    Posts
    302

    Default Short switch rods...

    Anyone have any experience with shorter switch rods in the 10’0” to 10’6” length? Seems like most switch rods are 11’0” and very few are made at a length shorter...t&t, Beulah, meiser, Douglas being the few that does the shorter lengths. Does anyone have any experience with them in the shorter lengths in 6wt and/or 7wt? In particular the t&t and Beulah rods. Thanks!

  2. #2

    Default Re: Short switch rods...

    I have a Meiser 10' 4wt switch rod. My go to rod for streamers on small to medium rivers. On switch rods a 4wt is comparable to a 6wt SH rod. Learning curve is higher on shorter rods. Call Bob at the shop, he'll give you a doctorial in switch rods.

  3. #3
    Join Date
    Oct 2013
    Location
    new york city
    Posts
    302

    Default Re: Short switch rods...

    Thanks Kayo. Would you say you use it more as a regular single hand rod? Single hand spey? Scandi? Skagit? Two handed overhead? May I ask how you have the rod lined with each application? Just tying to get a feel for how people like to use a short switch to see if it’s as versatile as I fantasize it might be. What would you say the compromises are of a short switch if there are any?

  4. #4
    Join Date
    Oct 2012
    Location
    Ontario, Canada
    Posts
    623

    Default Re: Short switch rods...

    I use a sub 10' two handed #4 with an OPST head to spey cast and fish trout and bass, I also use a DT6 if I am swinging smaller soft hackles. Longer rods have some advantages, like being able to mend and control line at a greater distance, and cast further. But short rods have advantages too, like casting with limited room behind you, easy casting with a compact stroke, and better feel while fishing.

    It's up to you to determine if the extra length is needed, I don't see much difference between 10' and 11' though.
    Danny

  5. Likes kayo liked this post
  6. #5
    Join Date
    Oct 2007
    Location
    Wasilla / Skwentna, Alaska
    Posts
    18,272
    Blog Entries
    141

    Default Re: Short switch rods...

    They have their place although I didn't specifically buy one. I guess you could say I owned one before they became known as 'Switch Rods'.

    Mine is a 1984 Orvis Light Salmon 9'6" with a 3 1/2" extension butt. It's an 8 weight that I've used a Javelin line on for years. A Javelin is a British micro brand very similar to the Rio Outbound or now their S.H. Spey lines. So you can call it a Scandi line having a34 foot head with integrated vinyl runner. It makes a fine small stream or braided river trout and light salmon rod.

    I tried to point another member toward a ten foot 9 weight in mint condition on the auction site but he was not interested. A nine weight in the old Orvis full flex graphite will use a line in the 325 to 375 grain range. The action of the rods lends itself to spey casting or overhead as needed. The bottom cork is removeable which I find a nice touch on shorter rods.

    The rod for sale has been relisted and the seller is prepared to accept offers. It's a 3 piece rod, if I didn't already own the 9 1/2 foot eight weight I would have bought the 10 instantly on sight. Just search Orvis Graphite Rod on the auction, I'd start at 200 because I think it's worth it. If anyone buys it please let me know, I already know you'll like it.

    Here are a few pics of mine, the butt extension seen in the photos is the 2" but I have a 3 1/2' also for Spey casting. I've also taken to using a vintage Marquis 8/9 instead of the Viscount you see in the photos.







    Super quality rods from another era that will last a lifetime. BTW mine is the 2 piece, the 10 footer for sale is a 3 piece

    Anywhere can be the land of great expectations, broken dreams, or paradise found, it's all up to you.

    Life On The Line - Alaska Fishing with Ard
    Ard's Forum blog, Alaska Outdoors

  7. Likes flytie09, bocast liked this post
  8. #6

    Default Re: Short switch rods...

    Quote Originally Posted by ryc72 View Post
    Thanks Kayo. Would you say you use it more as a regular single hand rod? Single hand spey? Scandi? Skagit? Two handed overhead? May I ask how you have the rod lined with each application? Just tying to get a feel for how people like to use a short switch to see if it’s as versatile as I fantasize it might be. What would you say the compromises are of a short switch if there are any?
    Set up
    Hardy Ultralight 6000 DD.
    OPST 25# lazar line
    OPST 225gr 13ft commando head
    OPST 12' commando 96gr sink tip
    Cutthroat 36" furled spey leader

    I go fishing it goes fishing. All I fish with is with steamers.
    Casting versatility is what's all about.

  9. #7

    Default Re: Short switch rods...

    I have a 10'6" Beulah Classic 6 WT switch rod. It's a nice rod. It's light in hand and you can still put some muscle to large fish. It has limitations as far as flies it can huck and distance. With the lines available to us today.....almost anything is possible.

    I like it for swinging sparser flies in lower water in the fall and spring on smaller streams. Coupled with a Scandi Short or Rage Compact, it gets the job done nicely and won't abuse you.


    “If I fished only to capture fish, my fishing trips would have ended long ago.”
    ~Zane Grey

    " . . . shouldn't a man stand on his own two feet and catch his own steelhead? Maybe put out some effort and find his own fish just for the fun of it?"
    ~Syd Glasso

  10. #8
    Join Date
    Oct 2013
    Location
    new york city
    Posts
    302

    Default Re: Short switch rods...

    Thank you folks for your input. Not that anyone on this site ever needs an excuse or nudging to buy more stuff but I think I’m gonna treat myself and try one of those shorter 6wt switch rods. Discovering this switch/spey world is dangerous. If anyone else has any more thoughts, comments, I’d still like to hear them. Thanks.

    Ard, go get that rod.

  11. #9

    Default Re: Short switch rods...

    When switches first started gaining popularity you saw a lot more 10' and 10'6" rods than you do now. I've owned a couple and cast a few others that were under 11 feet over the years and I actually prefer that length. My situation is that I prefer fighting a steelhead on a shorter SH rod, but I prefer casting a longer rod (two handed). The switch is a compromise for me, I can cast it like a spey (I never cast a switch single handed or overhead), but it fights a big fish more like a single hander than one of my 12+ foot speys.

    I think you'll be happy with a shorter 6 weight switch. It'll be about perfect for steelhead and you may find it useful in the salt for stripers in some situations as well.

  12. Likes huronfly liked this post
  13. #10
    Join Date
    Oct 2013
    Location
    new york city
    Posts
    302

    Default Re: Short switch rods...

    thank you everyone for your input. the rod in question was a t & t 10'0" 6wt dna switch rod that was on ebay. i put a bid on it and then forgot about it and when i remembered the rod sold $5 higher than my bid to someone else. this dang day job getting in the way of my fishing fantasies!!! aaaaaargh. thanks again for your input and opinions. on the bright side, it gives me something to stalk going forward...

Page 1 of 2 12 LastLast

Similar Threads

  1. Replies: 0
    Last Post: 06-29-2018, 06:50 PM
  2. Replies: 0
    Last Post: 12-19-2017, 09:40 PM
  3. Replies: 0
    Last Post: 10-20-2017, 05:00 AM
  4. Replies: 0
    Last Post: 10-13-2017, 07:10 PM
  5. Replies: 0
    Last Post: 05-21-2017, 10:00 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •