Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Page 2 of 2 FirstFirst 12
Results 11 to 17 of 17

Thread: need help!

  1. #11

    Default Re: need help!

    It almost seems as though your initial problem was dirty line or line so clean (as in sqeaky clean by using a lot of detergent to clean it) it simply wouldn't slip through the guides and shoot well or feed back easily when hauling.

  2. #12

    Default Re: need help!

    the wf line is working good, I got to cast a bit in the wind this evening, I took a video but my wide angle was to far away to see much. I may yet post a small segment. I am trying to slow my accelerations down and cast more overhead, but it still seems more natural to cast about 2 ft off my right shoulder. atleast i have no new knots to report on the leader.
    mike

  3. #13
    Join Date
    Mar 2009
    Location
    south florida
    Posts
    2,150

    Default Re: need help!

    I am trying to slow my accelerations down and cast more overhead, but it still seems more natural to cast about 2 ft off my right shoulder.
    The object is not to slow down your acceleration, but to smoooooth it out.

    Casting off at an angle is easier on my body too, but it is good to be able to cast directly overhead as well because it makes accuracy so much easier.

    Good to hear you are progressing and optimistic.

    About lines: Some WF lines feel to me like I am casting a brick not a fly line. These are the short, heavily front-weighted weight forward lines lilke many "bass tapers" or "outbound shorts". In general, the longer the taper, the solfter they will land on the water. Some are "compound" tapers with more than one taper.

    As you get more experience, look at the pictures of the tapers before buying, paying particular notice to not only the length, but where the thickness changes happen.

    But for now, just think smooooth acceleration starting just as the line straightens out in the opposite direction. Watch your backcast to see when this happens as an aid to your timing.

    Cheers,
    Jim

  4. #14

    Default Re: need help!

    thanks Jim, I plan to cast in the yard more tonight if the storms stay away, otherwise it might be a trail by fire at the water tomarrow. I will likly take off the leader in usign to yardcast and put on the 0x or 1x i picked up, and tie on mono tippet as the yard casting has knotted up the leaded a bit from the first day. ill report back.

  5. #15

    Default Re: need help!

    well first day on real water was a bust, the creek I had planed to go to has been sweeling from alot of rain over the last few days, and throw in an average of 15-20mph winds that location was a bust, I did get to cast a bit there and did get in a few rollcasts. I decided to try a small pond here, and one side was out of the wind but it was the corner where the grass carp are rolling right now, so more casting practice was had. now that I think about it I dont know what I would have done had one of those leg size carp took the fly haha. maybe next time.

  6. #16
    Join Date
    Nov 2008
    Location
    Parlin, NJ / Staten Island, NY
    Posts
    2,063

    Default Re: need help!

    Quote Originally Posted by mbphotos54 View Post
    well first day on real water was a bust, the creek I had planed to go to has been sweeling from alot of rain over the last few days, and throw in an average of 15-20mph winds that location was a bust, I did get to cast a bit there and did get in a few rollcasts. I decided to try a small pond here, and one side was out of the wind but it was the corner where the grass carp are rolling right now, so more casting practice was had. now that I think about it I dont know what I would have done had one of those leg size carp took the fly haha. maybe next time.
    I catch them on a 5WT all the time. Just let them run into the backing a few times and you'll be able to land them.
    The best way to a fisherman's heart is through his fly.

  7. #17

    Default Re: need help!

    cool, I guess i need a grass fly now. I do want to get some gills on the line or trout to work on my line handleing, these grass carp where huge, sure would be fun! Need to make me a blog

Page 2 of 2 FirstFirst 12

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •