Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Page 2 of 2 FirstFirst 12
Results 11 to 17 of 17

Thread: Wind knots in tippet or leader

  1. #11
    Join Date
    Apr 2011
    Location
    Michigan's U.P.
    Posts
    2,345

    Default Re: Wind knots in tippet or leader

    I pick them out if possible, if not, I don't worry about them. I wonder, maybe I should worry.

  2. #12
    Join Date
    May 2009
    Location
    St. Louis, Missouri
    Posts
    327

    Default Re: Wind knots in tippet or leader

    Quote Originally Posted by Rip Tide View Post
    ... if you need a tool to get the wind knot out, the damage is already done
    I have to disagree with you on this one Rip, at least when it comes to leaders! Depending on the leader material you can often get knots out of a leader with no damage, especially furled leaders (when you get the ocassional wind knot), but even mono or fluoro knotless leaders. I use a couple of inexpensive Rocky Mountain T-Pik tools (also known as a Fisherman's Knot-Pik'R) - see the eBay link below and the actual tool is pictured in the lower left corner of the packaging:
    Rocky Mountain T-PIK | eBay
    I keep a couple of these little tools on zingers, the tips of the tools are slightly rounded (not like a sharp hook) so it can be inserted into a knot to open the knot without damaging the line. If it is so tight one T-Pik won't do the trick, then you insert one from one direction and the other from the other direction and use the 2 tools to open the knot. It takes much less time to open a knot than it did for me to type this explanation.

    Now removing a knot from tippet - if you cannot simply back it out by hand then I agree - the damage is already done. Best to just cut out the knot and re-tie, or cut off the tippet and tie on a whole new length of tippet.

    My best answer for your question Joe is this - think about the strength of that tippet with a knot in it, and picture the next fish you hook is as big or bigger than the rated test strength of your tippet - before it got a knot! Do you want to risk the biggest fish of a trip (or a lifetime) because you intentionally left a knot in the tippet? Just a thought.

  3. #13
    Join Date
    Mar 2009
    Location
    south florida
    Posts
    2,150

    Default Re: Wind knots in tippet or leader

    Another of the little things that upped my landing rate when I made a New Years Resolution to myself to no longer lose fish to thrift or laziness.
    I remember two big tarpon I lost for being lazy in the last two years. One was for a hook that I knew was too dull, the other for a knot I was too lazy to cinch up with pliers and the hook ring on my buddies boat. Both were at the end of a slow day with little action.

    If I get a knot tight enough where the kink won't straighten fully, I cut it out if it's within 4 feet of the fly or so (unless it's at the end of a slow day when I'm tired, lazy and no longer optimistic ).

    Cheers,
    Jim

  4. #14

    Default Re: Wind knots in tippet or leader

    I can honestly say that I don't think I've ever lost a fish as a result of a wind knot breaking. I seldom take time to undo them unless they affect my presentation.
    FP

  5. #15
    Join Date
    Mar 2009
    Location
    south florida
    Posts
    2,150

    Default Re: Wind knots in tippet or leader

    You gotta start fishing for some bigger fish, Pegboy!

  6. #16
    Join Date
    Feb 2005
    Location
    South Texas
    Posts
    4,313

    Default Re: Wind knots in tippet or leader

    I actually agree with RipTide on this. If you can't get it out, you probably need to replace it.

    That said, I'm frequently fishing the local streams for fish under 2# with 3x tippet, so I'll often just not worry about it until I hang on a permasnag*, or am changing flies anyway or something.

    Why 3x for runts, you say? Stiffer mono is a bit less likely to knot up, turns over bulky flies better, and I find it easier to knot. (we're also talking about bass and sunfish here)

    (Permasnag- a spot from which one cannot free their fly via wiggling, the roll cast trick, or walking past it and pulling; frequently includes higher tree limbs, or deeper holes)
    http://sphotos.ak.fbcdn.net/hphotos-..._1276302_n.jpg

    I'd rather hunt fish than bait deer any day.

  7. #17

    Default Re: Wind knots in tippet or leader

    What I do with the knot depends on where it is and if the waters I am fishing hold big fish that can break a weakened leader.What I do with the knot depends on where it is and if the waters I am fishing hold big fish that can break a weakened leader.

    If the knot is in the butt or midsection of the leader, I take it out. I use a home made knot picker made from a sewing needle. You can also use a safety pin or a diaper pin. The reason I take the knot out and don't replace the section is that even a knot weakened butt section or mid section of a leader will be stronger than a new tippet.

    If the knot is on the tippet, I will replace the tippet ONLY IF the potential fish are large enough to break the tippet. Otherwise, what is the point. Just pull the knot tight and keep fishing. For the small streams I fish locally, a 13 inch Brookie is huge and no way would it break even a knot filled 5X tippet.
    Regards,

    Silver



    "Discovery consists of seeing what everybody has seen and thinking what nobody has thought"..........Szent-Gyorgy

Page 2 of 2 FirstFirst 12

Similar Threads

  1. Hook design and leader knots-which with what?
    By fredaevans in forum Flies
    Replies: 14
    Last Post: 01-02-2012, 12:35 AM
  2. Turning a Leader When Casting Into the Wind;
    By Ard in forum The Fly Cast
    Replies: 1
    Last Post: 03-12-2011, 02:20 PM
  3. Leader/tippet Q
    By ant in forum General Discussion
    Replies: 9
    Last Post: 12-09-2010, 01:05 PM
  4. knots in tippet
    By rjackh in forum Warmwater Fly Fishing
    Replies: 2
    Last Post: 08-02-2010, 09:36 PM
  5. Leader knots
    By HELLFIGHTER5308 in forum General Discussion
    Replies: 11
    Last Post: 06-06-2008, 03:28 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •