Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Page 1 of 3 123 LastLast
Results 1 to 10 of 21

Thread: Roll Casting question

  1. Default Roll Casting question

    I'm getting my first ever fly rod together right now for steelhead and bass. It's a TFO BVK 9ft 8wt with a Lamson Litespeed 3.5. I'm thinking about going with Scientific Angler GPX line. I will be fishing Lake Erie and Ontario tribs, as well as some smaller lakeS in that area. My friends tell me that I will be roll casting most of the time. Is double tapered line easier to roll cast with than weight forward line? It can get quite windy where I fish, and I believe weight forward line is better for that? Now I dont know what line to get. Any help is appreciated.

    Jigstick

  2. #2

    Default Re: Roll Casting question

    The taper and profile of a Scientific Angler GPX fly line is identical for the first 30 feet for the WF and the DT lines. Then the WF rear taper begins at 30 feet and extends back to the shooting line at about 40 feet. So both the DT and WF will roll cast exactly the same for the first 30 feet of line.

    See the bottom of pg 4 below:

    Chart Diagrams


    The WF profile means that you will not get into the shooting line until about 40 feet of fly line our of the rod tip.

    So if you are not going to use the long casting capability of the WF beyond say about 40 feet of fly line (then add your leader and rod length), the DT line would be better because it will last twice as long.

    If you are going to use that fly line for other types of fishing that will not require much roll casting and you will be shooting line, then get the WF.
    Regards,

    Silver



    "Discovery consists of seeing what everybody has seen and thinking what nobody has thought"..........Szent-Gyorgy

  3. #3
    Join Date
    Apr 2009
    Location
    Languedoc/near montpellier
    Posts
    6,628
    Blog Entries
    5

    Default Re: Roll Casting question

    Agree with siver creekwill simply add you shouldn't have great problems when it's windy with a 8 wt and the higher you are above water level the easier your roll cast will be

  4. #4
    Join Date
    Jun 2008
    Location
    Lake of the Woods/Rainy River Minnesota Canada border
    Posts
    4,752

    Default Re: Roll Casting question

    Welcome to the forum jig stick. Just out of curiosity, why do they think you will be roll casting most of the time?

  5. #5

    Default Re: Roll Casting question

    The Triangle taper line Lee Wulff came up with is supposed to be ideal for roll casting but..same question- why roll cast? I've fished the Salmon River north of Syracuse- no such need.

  6. Default Re: Roll Casting question

    I prefer the GPX for roll casting.....and all other casting LOL
    Check this out:

    Joan Wulff: The Roll Cast | MidCurrent

  7. Default Re: Roll Casting question

    Because most of the fishing is done from the banks or close to them, with the tree line right at ur shoulder. We are fishing near oak park and Burt dam, near buffalo

  8. #8
    Join Date
    Jul 2008
    Location
    quiet corner, ct
    Posts
    8,507

    Default Re: Roll Casting question

    Practice before you go.
    Most people find roll-casting difficult
    Extra practice will help a lot more than choosing one line over another
    The simpler the outfit, the more skill it takes to manage it, and the more pleasure one gets in his achievements.Ē --- Horace Kephart

  9. #9
    Join Date
    Dec 2010
    Location
    Ben Lomond, CA.
    Posts
    596

    Default Re: Roll Casting question

    Practice, practice as mentioned before, your practice of this cast will be more rewarding if itís done on the water, if you canít get streamside find a big swimming pool, as for line for me itís GPX but thereís lots of great lines out there.

    Rick

  10. #10
    Join Date
    Jan 2007
    Location
    Central Florida
    Posts
    5,392

    Default Re: Roll Casting question

    Hi jig stick,

    If I wanted a floating line for Steelhead it would be the SA Steelhead. I wouldn't get a GPX line until you have cast the rod and feel you need the added weight. Double taper lines have their uses but I don't think that is Steelhead fishing.

    Frank

Page 1 of 3 123 LastLast

Similar Threads

  1. roll casting
    By joshgamble in forum General Discussion
    Replies: 3
    Last Post: 07-15-2010, 08:52 AM
  2. Roll cast question
    By TxArcheo in forum The Fly Cast
    Replies: 26
    Last Post: 03-24-2010, 12:02 PM
  3. Roll casting and rod action
    By webrx in forum Fly Rods
    Replies: 12
    Last Post: 01-14-2010, 12:38 PM
  4. Sage Z-Axis Roll Casting
    By FrankB2 in forum Fly Rods
    Replies: 3
    Last Post: 12-16-2009, 08:38 PM
  5. Roll casting help needed
    By flyfishinginnewengland in forum The Fly Cast
    Replies: 12
    Last Post: 04-29-2006, 08:34 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •