Thanks Thanks:  0
Likes Likes:  4
Dislikes Dislikes:  0
Page 1 of 2 12 LastLast
Results 1 to 10 of 16

Thread: Distance Roll casting

  1. #1

    Default Distance Roll casting

    How far should I be able to roll cast? I'm having no problem with 40' roll casts but trying to go 50+ is a no-go. I find that the line directly in front of me just dives towards the water in a big U-shape. The tip of the cast remains elevated fine, but because the middle of my line sinks it kind of foils the unrolling process. I just can't get the roll-cast scene from "A river Runs Through It" out of my head where a nice tight loop carries out on a nice straight plane. That cast looks like its 70 or 80 ft.

    Any Tips???

  2. #2
    Join Date
    Oct 2007
    Location
    Wasilla / Skwentna, Alaska
    Posts
    15,246
    Blog Entries
    111

    Default Re: Distance Roll casting

    Ingredients; Slow to medium action rod with some backbone, DT or long belly light Spey line.

    I've been making long cast with no back cast for a long time. Very much a roll cast but now more widely known as a 'single hand Spey Cast' I would describe most of my streamer casting as a modified snap T cast which is pretty much a power roll the way I do it.

    ---------- Post added at 01:19 PM ---------- Previous post was at 12:49 PM ----------

    There is more that I will say regarding this topic. I've fished many tight places over the years and have developed various was to get the fly where I needed it to be. When speaking about a really long roll cast; contrary to the image of the young man making that cast in the movie, I've never found roll casting conducive to effective dry fly fishing. What i mean by this is that the very act of executing repeated roll casts results in even the best of my floating flies being pulled under the surface and inundated with water. This does not contribute to a good floating fly at the end of the leader. For fishing emerger type patterns I see no detriment but the movie depicted a perky dry bobbing along to be grabbed up by a rather large trout.

    The roll has always been a tool in the box that comes in handy in some dry fly applications but has never been a go to method for me. Streamers; this is another story entirely, I use what I initially described here (the snap T style roll) and have been able to do so with great results in the distances that I can deliver a fly of significant size to a target area. With wet flies roll or Spey style casts have no ill effect of the performance of the fly since 'the wetter the better' is a good rule for fishing sub surface.

    Anywhere can be the land of great expectations, broken dreams, or paradise found, it's all up to you.

    Life On The Line - Alaska Fishing with Ard
    Ard's Forum blog, Alaska Outdoors

  3. #3
    Join Date
    Feb 2011
    Location
    Rock River, Wyoming
    Posts
    527

    Default Re: Distance Roll casting

    Understanding Rod Action and Choosing the Right Rod for You a great article on rod action and appropriate uses. Especially the last couple of paragraphs. After reading those, consider this, I turned a mediocre roll casting rod into a great roll casting rod by nothing more than going to an eight weight line while the rod was a moderately fast seven weight rod.
    http://www.theflyfishingforum.com/forums/image.php?type=sigpic&userid=24405&dateline=129884  8088
    Great Fishing
    Der Alt Jaeger
    Chuck S

    "I've traveled many roads and some weren't paved."
    Will Rodgers

    http://fishing-folks.blogspot.com/

  4. #4
    Join Date
    Feb 2005
    Location
    South Texas
    Posts
    4,313

    Default Re: Distance Roll casting

    You can always try using your other hand on the butt of the rod to get a bit more snap, ala spey casting.

    Hopefully you'll feel spey-ey, not spayed.

    Thanks, I'll be here all week!
    http://sphotos.ak.fbcdn.net/hphotos-..._1276302_n.jpg

    I'd rather hunt fish than bait deer any day.

  5. Likes Ard, grassonfly liked this post
  6. #5
    Join Date
    Jun 2008
    Location
    Lake of the Woods/Rainy River Minnesota Canada border
    Posts
    4,752

    Default Re: Distance Roll casting

    I'd try a single hand spey cast and haul with your line hand. It'll go a lot farther than a roll cast will. It's not hard to hit 65 or 70 feet that way. 80' may be pushing it. Most people have trouble hitting 80 feet with a good double haul. One more thing, you don't need to change lines either. I hear a lot all the time about it, saying overline it. I hate it. I hate it worse than sand in my eggs. I can underline and hit 65 - 70 feet.

  7. #6
    Join Date
    Feb 2012
    Location
    West Plains, Mo.
    Posts
    151

    Default Re: Distance Roll casting

    Chuck, Thanks, Good read. I will disagree with one line in someones opinion in that article. I feel a rod does have action even though it's not loaded with line. I've never used the flex grading of a rod. As most i've always used the slow, medium, and fast action to determine what i was holding. Granted some may have been built for different casting situations and different size fish but there are a couple of factors that comes into play for myself. Practice, experience, then finesse. The later i will call method of application. Again Chuck. Good read.
    Eddy

  8. Default Re: Distance Roll casting

    To make a long distance roll cast it's important that there's no slack in the D-loop. To insure that there isn't, it's a good idea to try to begin your forward cast just before the fly stops moving. (Some anglers instead watch the shape of the D-loop and make their forward cast just before it begins to collapse.)

    Also, to maintain line/rod tension, I like to press the fly line against the butt with my finger. When I abruptly stop the rod I let go of the fly line.

    Finally, for roll casting I prefer a slower fly rod.

    Randy

  9. #8

    Default Re: Distance Roll casting

    Quote Originally Posted by Diver Dan View Post
    I'd try a single hand spey cast and haul with your line hand. It'll go a lot farther than a roll cast will. It's not hard to hit 65 or 70 feet that way. 80' may be pushing it. Most people have trouble hitting 80 feet with a good double haul. One more thing, you don't need to change lines either. I hear a lot all the time about it, saying overline it. I hate it. I hate it worse than sand in my eggs. I can underline and hit 65 - 70 feet.
    Sand in your eggs...never had that feeling. I've had sand in my clams and that wasn't so bad. So what I'm gathering is that I should be able to hit 50' even with a WF line without too many problems. I've never fished big water rods like you "spayed" casters so I will have to look up the single hand spey cast. I'll check it out and try a couple other things mentioned. I'll make sure I'm not letting my D loop slack up like Randy suggested; don't think that I am, but I'll check it out. As far as Ard's T-Snap cast...is that a two part cast?? I'm not sure I got the point of the cast from the youtube stuff I could dig up.

    Thanks for all the suggestions, hopefully some of these help me out.

  10. Default Re: Distance Roll casting

    Also, I'd try adding a single - downward - haul to your rollcasting.

    Randy

  11. #10
    Join Date
    Feb 2005
    Location
    South Texas
    Posts
    4,313

    Default Re: Distance Roll casting

    Quote Originally Posted by randyflycaster View Post
    Finally, for roll casting I prefer a slower fly rod.

    Randy
    I agree, and also think that longer rods work a bit better.

    I don't mean that you have to buy a 10' stick, but picking your 9' rod instead of 8' for a day that includes lots of roll casting can really help. I know some sing the praises of short rods on tight streams, but if I know I'll have to roll cast alot, I'd sooner have my 8.5' 3wt than a 7' rod.
    http://sphotos.ak.fbcdn.net/hphotos-..._1276302_n.jpg

    I'd rather hunt fish than bait deer any day.

  12. Likes db cooper liked this post
Page 1 of 2 12 LastLast

Similar Threads

  1. Roll Casting question
    By jig stick in forum The Fly Cast
    Replies: 20
    Last Post: 10-04-2011, 10:38 PM
  2. roll casting
    By joshgamble in forum General Discussion
    Replies: 3
    Last Post: 07-15-2010, 08:52 AM
  3. Roll casting and rod action
    By webrx in forum Fly Rods
    Replies: 12
    Last Post: 01-14-2010, 12:38 PM
  4. Sage Z-Axis Roll Casting
    By FrankB2 in forum Fly Rods
    Replies: 3
    Last Post: 12-16-2009, 08:38 PM
  5. Roll casting help needed
    By flyfishinginnewengland in forum The Fly Cast
    Replies: 12
    Last Post: 04-29-2006, 08:34 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •