Thanks Thanks:  0
Likes Likes:  16
Dislikes Dislikes:  0
Page 2 of 3 FirstFirst 123 LastLast
Results 11 to 20 of 23

Thread: Cracking the whip

  1. #11

    Default Re: Cracking the whip

    Thanks, xnykid.

    Great set of suggestions!

    Gary

  2. Default Re: Cracking the whip

    I am also a newbie on a fly rod. I was recently given an older fiberglass finwick to get me started in this great sport. It seems all I hear is the "crack of the whip" LOL. Luckily I haven't started putting flies on the end of the tippet yet.

    Thanks,

    Bobo

  3. #13
    easterncaster Guest

    Default Re: Cracking the whip

    Another suggestion when working on timing during practice:

    Do not use a yarn fly ...or any fly for that matter.

    A leader with no fly to finish off the cast is far less forgiving of bad timing - in this case 'pauses too short' ('changing direction too soon', 'coming forward too soon') which often result in the whip crack sound.

  4. #14

    Default Re: Cracking the whip

    The crack in the cast happens when the rythym is off between the forward cast and the backcast. You haven't put enough umph in the backcast and the line stalls in the air and when you make that sudden change of direction to get your fly to the target it snaps the end of the leader because it isn't moving in any direction. The speed of the forward cast and it's plane should equal the backcast.

    The tempo is 1..2..1..2. You pause slightly between the forward and back cast and try not to give it a burst of speed when you present the fly.

  5. #15

    Default Re: Cracking the whip

    I'm another newbe at fly fishing as well. Something I did In the shooting sports to help myself out is video tape what I'm doing. As someone better then me would talk to me and tell me when I was doing something wright or when I was doing it wrong. Keep a open mind doing this and review it when you get home or in the field. I'm one of those people when I can see I'll remember what I was doing and feel it. They fun part of taping it is you can go back and review it again and again when I hit a wall.

    Bill

  6. #16

    Default Re: Cracking the whip

    after about three frustrating years of leaning to play golf I also made a video of myself and after watching it I quit the sport all together, in my mind I was a lot better looking.

  7. Likes rwhite1 liked this post
  8. #17

    Default Re: Cracking the whip

    Even better than the video is to stand parallel to the casting plane, the direction your line is going back and forth. Then watch your line as you are casting and you'll see what you're doing wrong. Watch your loop, more often than not you're starting your forward cast too early. Its all timing with a little hesitation on the backcast to allow the loop to open up.

  9. #18

    Default Re: Cracking the whip

    That pfluger combo is ok, my 13 yr old son has a Medalist 5/6 wt 8' and it casts pretty well.


    Sent from my iPhone

  10. #19

    Default Re: Cracking the whip

    Pflueger combo was my first fly rod... It got the job done.

  11. Default Re: Cracking the whip

    I am mainly self taught and would say that I have decent casting. I learned pretty much everything when I started from watching Orvis Fly fishing videos. I would watch them cast and then video myself casting, critique myself, and get back out there. This has led me to be quite confident in my casting ability. It also gives you a good perspective on things you do that you might not know you do! Hope this helps!

Page 2 of 3 FirstFirst 123 LastLast

Similar Threads

  1. Replies: 0
    Last Post: 03-31-2012, 12:30 AM
  2. Small fly tying whip
    By Ebay USA in forum Fly Tying Equipment
    Replies: 0
    Last Post: 01-31-2012, 05:55 AM
  3. How to use a whip finish tool
    By Nafff in forum General Discussion
    Replies: 5
    Last Post: 09-14-2009, 04:56 PM
  4. How do I use a Whip Finish Tool
    By Frank Whiton in forum Share Patterns
    Replies: 0
    Last Post: 09-06-2009, 03:32 PM
  5. whip finish knot
    By basher in forum Fly Fishing Knots
    Replies: 8
    Last Post: 11-01-2008, 09:58 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •