Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Page 1 of 2 12 LastLast
Results 1 to 10 of 12
  1. Default casting weighted flies

    hey guys im having trouble casting weighted flies or just when i had weight to the tippet. It just doesnt seem to cast naturally. how do you guys do it.

  2. #2

    Default Re: casting weighted flies

    Open your loop a bit to help prevent tangles. Also, try 'casting in ovals'... lower on the back cast and more overhead on the forward cast.

  3. #3
    Join Date
    Jul 2008
    Location
    quiet corner, ct
    Posts
    8,539

    Default Re: casting weighted flies

    Forget the ...backcast..STOP.....forward cast...STOP
    You need to cast in in oval so that the weight never stops

    Bring the cast back at a 45* as usual, then with out stopping dead, cast over your head the forward cast

    So much easier than 'chuck and duck'
    The simpler the outfit, the more skill it takes to manage it, and the more pleasure one gets in his achievements. --- Horace Kephart

  4. #4
    Join Date
    Jan 2007
    Location
    Central Florida
    Posts
    5,392

    Default Re: casting weighted flies

    Hi eaglesfn68,

    I think first you need to be sure you setup is good. If you are trying to cast big heavy flies you may need to use a heavier rod and line. Or you may need a line with a more aggressive taper like a nymph line. Or you may need a faster action rod.

    You don't want to do a lot of false casting. What I try to do is a pick up, one back cast, and then delivery with a haul. Don't use a leader longer than 9' and in shallow water I would use a shorter leader. With split shot don't try to make too long of a cast. 25 to 40 feet is plenty. Remember that with weight on the fly or with heavy split shot you can make shorter cast and still get a good load on the rod. My preference in rods for this type of fishing is a fast action rod that is 9'6".

    Can you tell us about your setup?

    Frank

  5. Default Re: casting weighted flies

    The biggest thing that helped me learn to cast heavy stuff was to use an open loop and watch my backcast to make sure the line has completely straightened out before starting my forward cast.

  6. #6
    Join Date
    Feb 2005
    Location
    South Texas
    Posts
    4,313

    Default Re: casting weighted flies

    All great info here. Another way to help this out is to position yourself so that very little false casting is needed.

    For instance, if you are drifting a nymph through the bottom of a run, position yourself to the side of it instead of below it. While fishing it from below, you have to strip lots of line in and work it back out for the next drift. Lots of opportunities for tangles there. If you're fishing it from the side, you can cast quartering upstream, maintain the line during the drift with mending and rod lifting. Once its quartering downstream, point your back-cast perpendicular to the current, and lay it down again quartering upstream.

    Maintaining a dead drift from the side is indeed trickier than from below, so you might want to brush up a bit about mending and reach casts and such.
    http://sphotos.ak.fbcdn.net/hphotos-..._1276302_n.jpg

    I'd rather hunt fish than bait deer any day.

  7. #7

    Default Re: casting weighted flies

    Frank is right go to a med. Fast action rod....... had the same problem years ago and the med. fast action rod solved the problem casting larger bugs and streamers. If your using sinktip line cut half of it off and it will be alot easier to cast as well! But do what works for you because everyone casts different......... Lambster
    www.georgiaflyguide.com/
    Hello all! I've been looking for a flyfishing forum.........

  8. Default Re: casting weighted flies

    all mentioned above is spot on. one thing tho I found out you can't really correct is the wind! sometimes wind will affect bigger flies cause they have more resistance. only thing I found to try to get past this is to haul or double haul your cast. it helps cut the wind some.
    "Hey, you.Get your damn hands off my herl !!!!"

    owner of the GL Fishing Forum.

  9. Default Re: casting weighted flies

    I agree with using a heavier line and rod.

    I always prefer to use sinking lines instead of weighted flies. Weighted flies can break the tip of your rod.

    That said, when making longer casts with weighted flies I actually do not wait for my loop to unroll. If I do, I find the weighted fly will bounce at the end of the false cast and add slack to the line. Even if it doesn't bounce, the line will drop and you may end up hooking yourself on your next cast.

    Keep in mind, however, that when I make longer casts with weighted flies I actually used more acceleration on my casting stroke.

    But the wind can kill any cast, so I always wear a broad-brimmed hat and sunglasses.

    Randy

  10. #10
    Join Date
    Nov 2007
    Location
    Southeast Pennsylvania
    Posts
    2,760

    Default Re: casting weighted flies

    Increasing tippet diameter to 3x works for me. Oval casting works wonders
    as well. You might be able to find an oval casting demo on youtube; I
    first saw it on Joan Wulff's DVD.

Page 1 of 2 12 LastLast

Similar Threads

  1. Long Island Bahamas Bonefish DIY info desired.............
    By cutthroat in forum Saltwater Fly Fishing
    Replies: 8
    Last Post: 06-26-2009, 12:05 PM
  2. Winter Streamer Fly Swap Gallery
    By jclampwork88 in forum Fly Swap
    Replies: 1
    Last Post: 04-15-2009, 11:46 AM
  3. good day small stream wisconsin
    By LenHarris in forum Great Lakes Region
    Replies: 6
    Last Post: 04-05-2008, 10:00 PM
  4. Arkansas River Report 6/17/05 - Salida, Colorado
    By Fish Bones in forum Rocky Mountain Range
    Replies: 1
    Last Post: 06-21-2005, 07:58 AM
  5. Welcome, lvs2fsh!
    By Fish Bones in forum Member Introductions
    Replies: 0
    Last Post: 05-16-2005, 06:27 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •