Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Page 1 of 2 12 LastLast
Results 1 to 10 of 18

Thread: tying flies

  1. Default tying flies

    Tied my first fly this morning. Went out for about 3 hrs. and caught a dozen gills. Hitting it so hard the destroyed the hackle. What a blast though. One thing to catch on a store bought flie another to catch on a flie that I tied myself. Just wondering if any one has any tips?

  2. Default Re: tying flies

    sounds like your are well on your way. just keep tying. get some books, look at tape and attend any tying sessions in your area.

  3. Default Re: tying flies

    unfournatley I can't attend any tying classes in my area. all the classes are run at night during the week and I work nights. so i've been trying to find videos and books.

  4. #4
    Join Date
    Feb 2005
    Location
    South Texas
    Posts
    4,313

    Default Re: tying flies

    I may be scolded for recommending another site, but the fly tying instruction available at www.flyanglersonline.com is extensive and very thorough. It's how I learned. If you can, set up your tying station where you can see your monitor and scroll through the steps of tying a given fly. The beginner's section, may seem more trout-centric, but everything you learn will be useful.

    On that hackle, I would assume the fly was something of the wooly-bugger type. A wire rib will help the hackle last much longer. The rib MUST be wrapped around the hook shank in the opposite direction from the hackle. You should be able to find illustrated steps to this process on FAOL.
    http://sphotos.ak.fbcdn.net/hphotos-..._1276302_n.jpg

    I'd rather hunt fish than bait deer any day.

  5. Default Re: tying flies

    the first one that I tied was a gray-hackle peacock, wet fly. I'm thinking that I didn't have it secured good enough. Brought it home put a new hackle on it and a drop of tying glue on the head.

  6. #6

    Default Re: tying flies

    Freezy Man,
    Here is an article over Fly Tying that I found entertaining(see following link --scroll down to article) . I just picked up the Orvis Fly Tying 2005 Catalog. I'm going to have to start learning the art of Fly Tying myself so that I'm not spending millions on flies. Anyway, enjoy.
    Thanks,
    Terry

    EVOLUTION AND THE TWO-DOLLAR FLY

  7. Default Re: tying flies

    I've already tyed 2 flies myself. I think that if I can do it anyone can. The next one I tie though I'm going to incorpate some of the handy items I have around the house. My wife has horses so I'm going to tie in some horse hair and see how that looks. Just have to get some more thread and some wire. Want to try and tie a wooly bugger once I get some wire. Only wire that I've got around the house is solder and electric fence wire I know that the fence wire won't work not sure about the solder though. Has any tried it?

  8. #8
    Join Date
    Feb 2005
    Location
    South Texas
    Posts
    4,313

    Default Re: tying flies

    The electric fence wire is probably way too thick to be of much use. The solder is likely too big, but some is small enough to be useful for fly tyers. However, lead wire is generally used as weighting wrapped directly around the hook shank and then the fly is tied over that. Lead wire isn't all that strong and thus isn't the ideal rib.

    You probably do have some ideal ribbing sitting around the house, you just don't know it. Find that corded old appliance (radio, iron, hair dryer) you just haven't yet gotten around to throwing out. Chances are that cord is made up of many strands of pure copper wire that should be nearly ideal for ribbing purposes. If you can find such an appliance, you'll likely have enough wire for years.

    To keep Steve and myself out of trouble, I suppose I should point out that the appliance must be unplugged before any separation is done to any of its parts.
    http://sphotos.ak.fbcdn.net/hphotos-..._1276302_n.jpg

    I'd rather hunt fish than bait deer any day.

  9. Default Re: tying flies

    Never thought about copper wire. I know that I've got some wire around here somewhere. Both stranded and thin solid. Might have to do some expermenting to see which works better.

  10. Default Re: tying flies

    On the subject of copper wire, tons of thin copper strand can be found in transformers used on all sorts of electric equipment like radios, TVs, games, computers etc. It is generally very thin. (as Cliff said, unplug them first)
    I gave up on using solder years ago except for very large, heavily weighted streamers (size 2 for instance). One reason is that most solder contains a chemical flux that is really nasty stuff.
    I made flies for pan fish and bass out of dog fur for lots of years and caught plenty of fish on it. It was a free renewable source for "practice" flies and I suspect fine horse hair may work also. Of course if you have any bunnies.....

    If you keep your eyes out, you will find all sorts of real and synthetic furs (stuffed toys for instance), feathers and other tying material just laying about. Maybe a family member is into embroidery, knitting, crocheting or any other type of craft project. Lots of these materials are good.

    I don't suggest road kill. The disease possibilities are too great.

Page 1 of 2 12 LastLast

Similar Threads

  1. scientific angler steel head line
    By ffffg in forum Other Gear
    Replies: 1
    Last Post: 03-22-2006, 01:21 PM
  2. Arkansas River Report 6/17/05 - Salida, Colorado
    By Fish Bones in forum Rocky Mountain Range
    Replies: 1
    Last Post: 06-21-2005, 07:58 AM
  3. Airflow Freshwater Delta Polyfuse XT
    By fshfanatic in forum Other Gear
    Replies: 2
    Last Post: 05-18-2005, 11:03 AM
  4. Carry On Rules
    By Bahama Momma in forum General Discussion
    Replies: 4
    Last Post: 02-09-2005, 04:11 PM
  5. Tampa Bonefish
    By Bahama Momma in forum Southeast U.S.
    Replies: 1
    Last Post: 02-07-2005, 08:43 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •